** OcUK Tech Labs Fathom All in One Custom Cooler **

Status
Not open for further replies.
setter said:
Would the SR1 fit ok in a shinobi xl rjk? Think i read somewhere that this case has trouble fitting thicker rads with standard 25mm depth fans attached without a little bit of modding of the top panel.
Click to expand...

Possibly. Off the top of my head I can't remember what sort of clearencw it has. Best to add 25mm to the advertised thickness of the rad and measure up you self. Also be mindful of your motherboard MOSFET height as this can sometimes clash with roof mounted radiators.
 
The pump can run off a 12v header or a fan controller.

I would suggest an analog controller over digital to get the most control.
 
rjkoneill said:
Possibly. Off the top of my head I can't remember what sort of clearencw it has. Best to add 25mm to the advertised thickness of the rad and measure up you self. Also be mindful of your motherboard MOSFET height as this can sometimes clash with roof mounted radiators.
Click to expand...
Ill have to measure it up and see. Think ive seen builds on here whereby users have mounted the fans on the exterior of the top metal part of the case, (below the removeable top panel).
 
BaDBoY_uK said:
The Black Ice is larger at 57mm width. The XPSC is slimmer. The former should have better heat dissipation. But you need to make sure you can fit the larger rad. I bought the BI and it wouldn't fit
Click to expand...
rjkoneill said:
The xspc is a good rad. It will do a great job for every user.

The SR1 has built in fan shrouds that eliminate the deadspot behind the fan hub and thus increase airflow over the fins. SR1 has a lower FPI than the EX rad also meaning the fans can be ran slower and thus quieter if you wish
Click to expand...
Thanks! Does push/pull offer any benefit with either of these?
 
rjkoneill said:
The fans are the best out there for water cooling radiators now that Gentle Typhoons are end of life.
Click to expand...

Have you seen the new Grand Flex fans scythe have brought out? according to the stats the 2000rpm one slightly beats the SP120 high performance on noise/pressure and does >10CFM more. Would it be safe to assume these are Scythes replacements for the GT's if their no longer reselling them?
 
danielanthony (if you're still following the thread), which dimension(s) on the Black ICE rad made it impossible to mount at the top exhaust of your FT02? I'm just trying to work out what rads I could use instead, if I were to buy the parts separately.
 
ubersonic said:
Have you seen the new Grand Flex fans scythe have brought out? according to the stats the 2000rpm one slightly beats the SP120 high performance on noise/pressure and does >10CFM more. Would it be safe to assume these are Scythes replacements for the GT's if their no longer reselling them?
Click to expand...

I have. I am working with key vendors at the moment on something. Keep your eyes peeled :D
 
LurkingWeasel said:
danielanthony (if you're still following the thread), which dimension(s) on the Black ICE rad made it impossible to mount at the top exhaust of your FT02? I'm just trying to work out what rads I could use instead, if I were to buy the parts separately.
Click to expand...

Its the part of the rad where the pipes come out which is the problem, they add another 1.5cm onto the height of the rad. The H70 had the pipes coming straight out of the front of its rad so no additional space was needed and so it would fit ok in the top 120mm fan position.

Hope I explained this ok!
 
danielanthony said:
Its the part of the rad where the pipes come out which is the problem, they add another 1.5cm onto the height of the rad. The H70 had the pipes coming straight out of the front of its rad so no additional space was needed and so it would fit ok in the top 120mm fan position.

Hope I explained this ok!
Click to expand...

Yeah - had a look at the H70 there and see what you mean. Thanks again! :)
 
well, in honesty. the review is a high priority with the review site we have chosen

the problem we are facing I that Coolermaster seem to have made the Eisberg unavailable :rolleyes:

I should have more information today but it seems that the current stock may be the last of them and I might have to take the Eisberg & Fathom off sale.
 
rjkoneill said:
well, in honesty. the review is a high priority with the review site we have chosen

the problem we are facing I that Coolermaster seem to have made the Eisberg unavailable :rolleyes:

I should have more information today but it seems that the current stock may be the last of them and I might have to take the Eisberg & Fathom off sale.
Click to expand...

Why not switch to the swiftech apogee drive II
 
Last edited:
I hope you can get more Eisberg stock as these look very interesting!

Does anyone know if the 240 SR1 rad would have any issues fitting into the top of a Corsair 600t?
 
Rjkoneil ive got this case Cooler Master HAF 912 Plus, with removed HD caddys for better air flow.

Will the 240mm tubing/pipes reach to the front or would i have to ask for longer tubing.

Making a purchase some time to day or tomorrow an thought it best to ask before making an order :D
 
in talks with coolermaster

i believe they are looking at supplying these to OCUK for this project

so panic over.

CyberCrow, you would probably have to ask for longer tubing tbh mate.
 
Status
Not open for further replies.
Back
Top Bottom