Man of Honour
You can take out the little box, it doesn't have to stay attached inside the case.
*Official* Antec P182 Case's,Builds,Modifications & FAQ's
- Thread starter BFG_9000
- Start date
Associate
No, it has become a challenge now, I've taken it personally!
Nice one, how much they melt indicates whether my case temps are low enough!
Condoms maybe? "Hold that thought baby, just need to find my crosshead screwdriver..."
Associate
- Joined
- 5 Nov 2005
- Posts
- 2,178
Switched the fans from low to medium and CPU temp dropped 10c. Go figure
Must be a lot more noise though...........
Soldato
Hey guys,
I'm just in the process of changing all the TriCools in my case - how the hell do you get the lower chamber fan out?
I know some of you here have already done this; I don't want to break it out btw
Cheers,
SW.
I'm just in the process of changing all the TriCools in my case - how the hell do you get the lower chamber fan out?
I know some of you here have already done this; I don't want to break it out btw
Cheers,
SW.
Soldato
Makes me want the SE more! Might get it powder coated, that way I have the exterior that I prefer and the interior!
Need to get these Antec fans changed though, put something better in and one by the hard drives
Need to get these Antec fans changed though, put something better in and one by the hard drives
Soldato
No worries guys! I used search and found this: http://forums.overclockers.co.uk/showthread.php?t=17780285&highlight=remove+fan+p182
Btw, I'm currently without the top/rear exhaust fan while I await my Zalman fan controller - my new fans are in, just not connected, and my motherboard temp has gone up about 8 degrees
They're obviously quite effective then?
SW.
Btw, I'm currently without the top/rear exhaust fan while I await my Zalman fan controller - my new fans are in, just not connected, and my motherboard temp has gone up about 8 degrees
They're obviously quite effective then?
SW.
Associate
i bought some yate loon fans to replace the stock ones but they seem louder than the stock tri-cool fans at low setting have i made a mistake in changing the fans?? 
Soldato
have you modded the yate loons on 7v?
Associate
no, now the stupid question any links to how to do this im sure ive read something like this on ocuk before
Associate
Anyone know where you can get Vinyls or skins for these cases, I know OcUk don't sell them.
Had a good look around on google
Thanks
Had a good look around on google
Thanks
Soldato
Would that be for lowering the rpm? Must admit, I've only got two running at 1300rpm, but they do seem a bit noisier? I'm not too worried atm, got a fan controller in transit
SW.
Eagerly waiting your results
Antec P182 with fully internal watercooling and internals powdercoated black.
With Feser 1 Red, clear / blue helix coils and UV lights
And some pics with the side panel windowed
Still workin on the P182 with a 360 internal, theres a hell of a lot of work to be done on it
Associate
my pictures
now, i want to put in a 120mm fan to help my GTX temperatures, any suggestion on where and how to do that?
now, i want to put in a 120mm fan to help my GTX temperatures, any suggestion on where and how to do that?
Soldato
marcus you got MSN by any chance? Need some advice on a P182 mod! Got a 120.2 but buying a 120.3, want to mount it either internally on the top of externally on the top. its pretty much like what you did above with the rad on top its just what I need to cut with what etc
yup added it to my profile for you
I've got some pics of the internal 360 for you if you want them as well.
Soldato
marcus that is some amazing work. The P182 will definitely be my next case....you're an inspiration buddy
Soldato
Be careful gurusan! P182 is a lot of hard work to get looking good! Been talking to marcus on MSN for a while. I already knew that the side panels are a pain in the backside to cut due to how they are constructed!
I was hoping to internally mount a 360mm rad but thats not going to happen, marcus has a great idea for it though which I would love to do but too much work for myself! Might try and mount a 240mm internally otherwise its 360mm on the back!
I was hoping to internally mount a 360mm rad but thats not going to happen, marcus has a great idea for it though which I would love to do but too much work for myself! Might try and mount a 240mm internally otherwise its 360mm on the back!