Official DFI NF4Ultra-D/SLi owners thread.

FreeStream · 14 Feb 2005 at 18:28

Well, I have TCCD coming tomorrow, if it doesnt overclock then Ill flash it with the 209, if that doesnt work, RMA it is

Concorde

snow patrol · 14 Feb 2005 at 21:02

Concorde Rules said:
Well, I have TCCD coming tomorrow, if it doesnt overclock then Ill flash it with the 209, if that doesnt work, RMA it is

Concorde

my TCCD works fine, i would worry.

ricco · 14 Feb 2005 at 21:20

Change log.
Added link to Ultra-D to SLI conversion & results

Darkman · 14 Feb 2005 at 22:58

How do I save a screenshot?

Jokester · 14 Feb 2005 at 23:00

Darkman said:
How do I save a screenshot?

Print Screen then open MS Paint or similar, paste image and save.

Jokester

ricco · 14 Feb 2005 at 23:02

darkman,
highlight the 'window' you want to screen shot, if you want to do the whole desktop, just click on it and then hold Ctrl down, hit PrtScr key twice.
then goto run, type mspaint.
then from paint, Edit drop down menu, choose paste. There we go

Darkman · 14 Feb 2005 at 23:06

You're both stars.

I can't believe I had to ask that question

webbyman · 15 Feb 2005 at 01:18

im experiencing problems trying to overclock...

basically i just get hdd errors and resets all the time after the fsb goes up past 206

i have an ultra-d and a winnie 3000+

i have tryed my sata hdd in all 4 ports
i have upped the fsb to about 210
upped the cpu voltage to about 1.45
still errors :confused:

what shall i do any suggestions

ricco · 15 Feb 2005 at 01:51

webbyman, set the PCIe mhz to 101 and then try.

Also put your memory to 166 setting or up with Vdimm to 2.8v
Also set HTT multiplier to 4x not 5x

What BIOS version are you running ?

webbyman · 15 Feb 2005 at 02:53

sorry yea i set the pci-e to 101 aswell and have set the htt to x3 and x4
i will try upping the memory, will these all cause problems starting up windows? ,like errors and stuff (e.g too low cpu voltage)

i cant realy say i have done my overclocking... :rolleyes:

thanks for the sugestments

ricco · 15 Feb 2005 at 03:17

your not upping the memory, your selecting a lower divider.,

mightynimrod · 15 Feb 2005 at 03:22

ricco said:
your not upping the memory, your selecting a lower divider.,

Off topic but Ricco do you want the GFX card?

ricco · 15 Feb 2005 at 03:25

webbyman · 15 Feb 2005 at 09:04

and im running the bios listed on the first page.

SOSAGES2 · 15 Feb 2005 at 10:40

anyone having issues running 4x512 sticks of ram in this board?

Rilot · 15 Feb 2005 at 11:01

According to SmartGuadian my PWM IC temperature is 167 degrees C under load. This can't be right surely.

snow patrol · 15 Feb 2005 at 11:35

The only issue i'm having at the moment is that sometimes my USB mouse isn't detected when i load windows. I have to pull it out and push it back in again, then it's fine.

Any ideas about that?

ricco · 15 Feb 2005 at 13:53

SOSAGES2 said:
anyone having issues running 4x512 sticks of ram in this board?

A64 does'nt support 4x PC3200, so if you are happy to run them at 2700 spec, then should be ok. Its more to do with CPU's mem controller then the board.

ricco · 15 Feb 2005 at 13:55

snow patrol said:
The only issue i'm having at the moment is that sometimes my USB mouse isn't detected when i load windows. I have to pull it out and push it back in again, then it's fine.

Any ideas about that?

I have had that with WinXP on & off with the Logitech with various boards for 3years, try enabling USB Mouse & KB support in BIOS.

ricco · 15 Feb 2005 at 13:56

Rilot said:
According to SmartGuadian my PWM IC temperature is 167 degrees C under load. This can't be right surely.

Smartguadian is'nt reliable. Run a good becnhmark and reboot, check it in BIOS.