** Official Mayhems Development Log **

[Silent_Scone]

Or just don't use dyes and use any clear pre mix and you can just drain and refill. Each to their own though

 

[game4it]

Hi Mayhems.
I have used two reds that both turned purple.

First off i used X1 Premix blood red with Primochill tubing (non advanced lrt) for about two months.The tubing stained badly but the main thing was the blood red turned into a see through deep purple colour.

I cleaned the loop and ran with distilled and a silver coil for a while with no problems.

I cleaned the loop and then tried red XT-1 Concentrated Coolant with primochill advanced lrt and rsn it for about 3 months.This has turned purple also but this time the tubing wasn't stained.

Any ideas what could be causing this please?

 

[R.C.Anderson]

Which tubing would you recommend for use with Pastel? I used Masterkleer before, however after 2 years of use, it's slightly discoloured, and as I'm changing the colour of my coolant, it needs to be replaced, and OCUK don't stock Masterkleer anymore!

 

[dtoo]

i wud love that Orange

 

[tipes]

Which tubing would you recommend for use with Pastel? I used Masterkleer before, however after 2 years of use, it's slightly discoloured, and as I'm changing the colour of my coolant, it needs to be replaced, and OCUK don't stock Masterkleer anymore!

I would suggest this:-

http://www.overclockers.co.uk/showproduct.php?prodid=WC-116-PM&groupid=962&catid=1530&subcat=1777

In whatever size you need of course. Seems to resist staining and clouding pretty well by most accounts.

Mark

 

[R.C.Anderson]

I would suggest this:-

http://www.overclockers.co.uk/showproduct.php?prodid=WC-116-PM&groupid=962&catid=1530&subcat=1777

In whatever size you need of course. Seems to resist staining and clouding pretty well by most accounts.

Mark

That is what I was leaning towards, but unfortunately it's out of stock in the size & colour I need (16/11, clear)

 

[tipes]

That is what I was leaning towards, but unfortunately it's out of stock in the size & colour I need (16/11, clear)

If you are in a hurry - could always purchase elsewhere at a pinch. Or ask customer service when due back in stock.

 

[Shawy]

I've got some 'Perfect Pink' fluid for my upcoming build, but it's not quite perfect. It's quite a milky pink rather than the hot pink I'm after. I'm thinking of adding some red dye to darken it slightly to match my cables.

Any tips/advice?

 

[opstrat]

Hi mick hope you are well.

Thinking of using the ice dragon this time round, is there any thing I should look out for?

 

[Devious ST]

any way of adding uv to the pastel mint green?

 

[Captain_Bosh]

Hi

Are there any UV reactive green colors from the pastel range? Mint Green looks like it might be but I can't tell

 

[Mayhems]

Sorry for rather late replay lost my passcode. UV effects on pastel are very hard to do because pastel is actively rejecting UV light.

 

[Mayhems]

In Dev

These are not like any thing out there atm. They are pure 100% guaranteed over kill ...

One is 60mm High FPI (why .... because we can)
One is 60mm Normal FPI

These are Mayhems QPTTHF Rads

 

[R.C.Anderson]

Very nice!

Would be interesting to see how they compare to my SR1!

 

[stuie]

Any news on the aurora v2? need to do a strip of my orange pastel soon as its been running 18 months but holding out for news on this

 

[GiraffePencils]

Rads look good

 

[Mayhems]

2 is rolling out as old stock depletes.

 

[stuie]

Is the v2 any longer lasting?

 

[Mayhems]

yes. It all depends again on how you build your system.

 

[tipes]

yes. It all depends again on how you build your system.

Could you elaborate on that a bit please - tips always welcome to get the best etc.

Mark