**Official MikroTik Hardware **
- Thread starter jonneymendoza
- Start date
What about using just a CRS305-1G-4S+IN as a direct replacement for the USG3P? It's not like the USG is at all powerful?
Uplink to my 16 port Switch then use the 4 SFP+ for a 2.5g WAN and 3 x 10gbe LAN?
Could I configure it like that in the RouterOS?
Uplink to my 16 port Switch then use the 4 SFP+ for a 2.5g WAN and 3 x 10gbe LAN?
Could I configure it like that in the RouterOS?
Soldato
- Joined
- 24 Mar 2018
- Posts
- 3,234
- Location
- Brighton
The Little Guy arrived... \o/ Hap AX2
I have just a few out of the box tests 20/40/80 5G
Using AX200 Windows 11 22H2
I have just a few out of the box tests 20/40/80 5G
Using AX200 Windows 11 22H2
Code:
So I Have CPU temp 60c while testing and 57c idle after testing
cpu Usage 30% ish hammering the wifi --bidir
cpu usage 25% ish for uploads cpu temp 60c
cpu usage 22% ish for downloads cpu temp 60c
Averages.
Nothing fell over yet, happy so far.
iperf3 -c 192.168.88.252 -b 400M --bidir
Connecting to host 192.168.88.252, port 5201
[ 5] local 172.19.208.25 port 59548 connected to 192.168.88.252 port 5201
[ 7] local 172.19.208.25 port 59550 connected to 192.168.88.252 port 5201
[ ID][Role] Interval Transfer Bitrate Retr Cwnd
[ 5][TX-C] 0.00-1.00 sec 47.8 MBytes 401 Mbits/sec 0 1.67 MBytes
[ 7][RX-C] 0.00-1.00 sec 47.5 MBytes 398 Mbits/sec
[ 5][TX-C] 1.00-2.00 sec 47.6 MBytes 400 Mbits/sec 0 1.80 MBytes
[ 7][RX-C] 1.00-2.00 sec 47.7 MBytes 400 Mbits/sec
[ 5][TX-C] 2.00-3.00 sec 47.8 MBytes 401 Mbits/sec 0 1.80 MBytes
[ 7][RX-C] 2.00-3.00 sec 47.7 MBytes 400 Mbits/sec
[ 5][TX-C] 3.00-4.00 sec 47.6 MBytes 399 Mbits/sec 0 2.01 MBytes
[ 7][RX-C] 3.00-4.00 sec 47.7 MBytes 400 Mbits/sec
[ 5][TX-C] 4.00-5.00 sec 47.8 MBytes 401 Mbits/sec 0 2.01 MBytes
[ 7][RX-C] 4.00-5.00 sec 47.5 MBytes 398 Mbits/sec
[ 5][TX-C] 5.00-6.00 sec 47.6 MBytes 400 Mbits/sec 0 2.01 MBytes
[ 7][RX-C] 5.00-6.00 sec 48.0 MBytes 403 Mbits/sec
[ 5][TX-C] 6.00-7.00 sec 47.6 MBytes 400 Mbits/sec 0 2.01 MBytes
[ 7][RX-C] 6.00-7.00 sec 47.1 MBytes 395 Mbits/sec
[ 5][TX-C] 7.00-8.00 sec 47.8 MBytes 401 Mbits/sec 0 2.01 MBytes
[ 7][RX-C] 7.00-8.00 sec 48.0 MBytes 403 Mbits/sec
[ 5][TX-C] 8.00-9.00 sec 47.6 MBytes 400 Mbits/sec 0 2.01 MBytes
[ 7][RX-C] 8.00-9.00 sec 47.6 MBytes 399 Mbits/sec
[ 5][TX-C] 9.00-10.00 sec 47.8 MBytes 401 Mbits/sec 0 2.01 MBytes
[ 7][RX-C] 9.00-10.00 sec 47.7 MBytes 400 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-10.00 sec 477 MBytes 400 Mbits/sec 0 sender
[ 5][TX-C] 0.00-10.01 sec 477 MBytes 399 Mbits/sec receiver
iperf3 -c 192.168.88.252
Connecting to host 192.168.88.252, port 5201
[ 5] local 172.19.208.25 port 59560 connected to 192.168.88.252 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 92.1 MBytes 773 Mbits/sec 15 1014 KBytes
[ 5] 1.00-2.00 sec 88.8 MBytes 744 Mbits/sec 39 794 KBytes
[ 5] 2.00-3.00 sec 86.2 MBytes 724 Mbits/sec 86 623 KBytes
[ 5] 3.00-4.00 sec 85.0 MBytes 713 Mbits/sec 19 506 KBytes
[ 5] 4.00-5.00 sec 78.8 MBytes 661 Mbits/sec 3 443 KBytes
[ 5] 5.00-6.00 sec 76.2 MBytes 640 Mbits/sec 0 562 KBytes
[ 5] 6.00-7.00 sec 78.8 MBytes 661 Mbits/sec 5 492 KBytes
[ 5] 7.00-8.00 sec 78.8 MBytes 661 Mbits/sec 0 599 KBytes
[ 5] 8.00-9.00 sec 81.2 MBytes 682 Mbits/sec 17 486 KBytes
[ 5] 9.00-10.00 sec 80.0 MBytes 671 Mbits/sec 0 600 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 826 MBytes 693 Mbits/sec 184 sender
[ 5] 0.00-10.01 sec 822 MBytes 690 Mbits/sec receiver
iperf Done.
iperf3 -c 192.168.88.252 -R
Connecting to host 192.168.88.252, port 5201
Reverse mode, remote host 192.168.88.252 is sending
[ 5] local 172.19.208.25 port 59588 connected to 192.168.88.252 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 87.9 MBytes 737 Mbits/sec
[ 5] 1.00-2.00 sec 94.5 MBytes 792 Mbits/sec
[ 5] 2.00-3.00 sec 97.7 MBytes 819 Mbits/sec
[ 5] 3.00-4.00 sec 96.6 MBytes 811 Mbits/sec
[ 5] 4.00-5.00 sec 97.6 MBytes 819 Mbits/sec
[ 5] 5.00-6.00 sec 95.7 MBytes 803 Mbits/sec
[ 5] 6.00-7.00 sec 99.1 MBytes 831 Mbits/sec
[ 5] 7.00-8.00 sec 95.0 MBytes 797 Mbits/sec
[ 5] 8.00-9.00 sec 95.9 MBytes 804 Mbits/sec
[ 5] 9.00-10.00 sec 97.6 MBytes 819 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 960 MBytes 805 Mbits/sec sender
[ 5] 0.00-10.00 sec 958 MBytes 803 Mbits/sec receiver
iperf Done.
Associate
- Joined
- 22 Oct 2002
- Posts
- 2,059
- Location
- Hull, UK
Interesting, hadn't seen anywhere who had any stock. What version of RouterOS is it running?
Soldato
- Joined
- 24 Mar 2018
- Posts
- 3,234
- Location
- Brighton
Code:
MMM MMM KKK TTTTTTTTTTT KKK
MMMM MMMM KKK TTTTTTTTTTT KKK
MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK
MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK
MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK
MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK
MikroTik RouterOS 7.5 (c) 1999-2022Soldato
- Joined
- 24 Mar 2018
- Posts
- 3,234
- Location
- Brighton
The amount of options are mind bending!
Associate
- Joined
- 22 Oct 2002
- Posts
- 2,059
- Location
- Hull, UK
I think you can upgrade your packages and routerBOARD firmware to 7.6 stable now.
Soldato
- Joined
- 24 Mar 2018
- Posts
- 3,234
- Location
- Brighton
Thanks I'll take a look, I'm waiting for my SH5 to turn up on friday, hopefully I'll be a little more comfortable by then to move everything over at the weekend.
Soldato
- Joined
- 24 Mar 2018
- Posts
- 3,234
- Location
- Brighton
We ordered it way before the AX3 came out. We also only have 200/20. The AX2 will be replacing a WDR3600 with openwrt just for the 2.4g, I also have another A7 as my main TV point switch/wifi which gives 300Mbps. The long term plan is to get an AX3 later on if we upgrade to faster speeds. we don't have any internal big speed needs 1G is enough. The SH5 is just pure curiosity! It's also my first venture into MikroTik for learning what it has to offer.
I guess we can extend the MikroTik family as and when if we like it.
Soldato
- Joined
- 24 Mar 2018
- Posts
- 3,234
- Location
- Brighton
Any wise words would be appreciated before I dive in and try to auto-update this Hap AX2 to the latest RouterOS 7.6 as of writing.
I got my config backed up safe and sound.
I got my config backed up safe and sound.
Last edited:
Associate
- Joined
- 22 Oct 2002
- Posts
- 2,059
- Location
- Hull, UK
The simple way is from Winbox, system - packages - check for updates, then download and install. Then reboot, then system - routerBOARD, upgrade and reboot, then you should be golden.
Just picked up a cheeky SRJ10 from the auction site. Don't understand why they are so hideously expensive for an SFP>Copper converter in general but this will allow me to hook my B660 board into the CRS326 and at least get 2.5Gb into my network now (yes I have multigig on the backbone so it's not going to waste).
Am really tossing up at the moment though, got a Dell R210 (E3-1220L) running ESXi with a CHR. Built with the intention of doing some really precise queueing but then have taken the lazy option and gone FQ_CoDel on my PPPoE interface not that it ever fills up.
Also have a Hex R3 which is sitting doing nothing and I can't help but think is the power draw worth it for the R210?
Nothing is broken so I get there's no need to fix it and the resale of the R210 is probably non existent but yeah.... hardware struggles.
Am really tossing up at the moment though, got a Dell R210 (E3-1220L) running ESXi with a CHR. Built with the intention of doing some really precise queueing but then have taken the lazy option and gone FQ_CoDel on my PPPoE interface not that it ever fills up.
Also have a Hex R3 which is sitting doing nothing and I can't help but think is the power draw worth it for the R210?
Nothing is broken so I get there's no need to fix it and the resale of the R210 is probably non existent but yeah.... hardware struggles.
Soldato
- Joined
- 24 Mar 2018
- Posts
- 3,234
- Location
- Brighton
I must say I was a little worried how it might go! I didn't even have time to sip on a cup of coffee and BOOM it was all done.
I think they have the balance right here and most (tech savy) people could install this device without much trouble. I did find things like webfig doesn't WoW me. Also Winbox (Snap) on ubuntu (tried apt as well) just doesn't give the same pop back up experience that the Windows version does. No great shakes... it works. What else - oh yes the 5G fell over about 4 times in 12 hours. Need to look a little harder now I've updated.
The QOS It just works. As a first time buyer/User We are happy and would buy again, great product so far.
So before I go down this rabbit hole, Is it worth enabling containers and moving my pi-hole over to the AX2, not sure of space etc/ 90MB remaing logs.... blah, or just leave that for a bigger device.
Associate
- Joined
- 22 Oct 2002
- Posts
- 2,059
- Location
- Hull, UK
I have a pi-hole container set up on my Mikrotik 5009 running ROS7.6, that has the 1GB of ram, I run the pi-hole on a 32GB Sandisk cruzer usb stick. Last time I checked I had 550MB of ram free on the set up. I used the info from Network Berg's Youtube video and Mikrotik wiki info to get it set up and unning nicely. I have my wireguard VPN set on my little hAP lite, this is just used for online streaming over the 2.4ghz wifi and fast ethernet for my HTPC.
Soldato
- Joined
- 24 Mar 2018
- Posts
- 3,234
- Location
- Brighton
@Super Tigers
From watching that Video the answer is NO, the device doesn't have a USB port and also the docker image is 500MB.
Associate
- Joined
- 22 Oct 2002
- Posts
- 2,059
- Location
- Hull, UK
The hAP AX2 does have a 1GB of ram, the same as my 5009 but I thought they would have stuck a USB port on it for external containers. I was all set to get a hAP AX2 as well but not having a USB port is a major drawback.