@Rossi~
Your Proc ODT will probably be in the 40's. DR stuff seems higher. Is just me or does lower ohm Proc ODT seem to mean lower latency? With same setting but changing Proc ODT 68 -> 53 ohm went from 70ns -> 65ns??? Need to play more. I don't know how low dual rank stuff can go.
Also my 3600C14 although does not fail memtest, did 3000% hci. But still get random crashes when gaming or just sat in windows. Not often, but to much for my liking. 1usmus has also mentioned this trait for high speed c14. So have got to 3666 C16 now, chasing 3733 now, but i dont think my sticks will do it.
FWIW here are my settings.
3600C14
[2019/08/05 21:06:03]
Ai Overclock Tuner [Manual]
BCLK Frequency [100.0000]
BCLK_Divider [Auto]
CPU Core Ratio [Auto]
Performance Bias [Auto]
Memory Frequency [DDR4-3600MHz]
FCLK Frequency [1800MHz]
Core Performance Boost [Enabled]
SMT Mode [Enabled]
EPU Power Saving Mode [Disabled]
TPU [Keep Current Settings]
Mem Over Clock Fail Count [Auto]
DRAM CAS# Latency [14]
DRAM RAS# to CAS# Read Delay [15]
DRAM RAS# to CAS# Write Delay [14]
DRAM RAS# PRE Time [15]
DRAM RAS# ACT Time [32]
Trc [48]
TrrdS [5]
TrrdL [6]
Tfaw [24]
TwtrS [4]
TwtrL [12]
Twr [12]
Trcpage [Auto]
TrdrdScl [4]
TwrwrScl [4]
Trfc [345]
Trfc2 [256]
Trfc4 [155]
Tcwl [16]
Trtp [8]
Trdwr [7]
Twrrd [3]
TwrwrSc [1]
TwrwrSd [7]
TwrwrDd [7]
TrdrdSc [1]
TrdrdSd [5]
TrdrdDd [5]
Tcke [1]
ProcODT [68.6 ohm]
Cmd2T [1T]
Gear Down Mode [Enabled]
Power Down Enable [Enabled]
RttNom [RZQ/7]
RttWr [RZQ/3]
RttPark [RZQ/1]
MemAddrCmdSetup [0]
MemCsOdtSetup [0]
MemCkeSetup [0]
MemCadBusClkDrvStren [24.0 Ohm]
MemCadBusAddrCmdDrvStren [24.0 Ohm]
MemCadBusCsOdtDrvStren [24.0 Ohm]
MemCadBusCkeDrvStren [24.0 Ohm]
CPU Load-line Calibration [Auto]
CPU Load-line Calibration [Auto]
CPU Current Capability [140%]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Disabled]
Active Frequency Mode [Disabled]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Extreme]
CPU Power Thermal Control [120]
VDDSOC Load-line Calibration [Auto]
VDDSOC Load-line Calibration [Auto]
VDDSOC Current Capability [140%]
VDDSOC Switching Frequency [Auto]
VDDSOC Phase Control [Extreme]
DRAM Current Capability [130%]
DRAM Power Phase Control [Extreme]
DRAM Switching Frequency [Auto]
DRAM VBoot Voltage [1.47000]
VTTDDR Voltage [Auto]
VPP_MEM Voltage [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
VDDP Voltage [Auto]
VDDP Standby Voltage [Auto]
1.8V Standby Voltage [Auto]
CPU 3.3v AUX [Auto]
2.5V SB Voltage [Auto]
DRAM R1 Tune [Auto]
DRAM R2 Tune [Auto]
DRAM R3 Tune [Auto]
DRAM R4 Tune [Auto]
PCIE Tune R1 [Auto]
PCIE Tune R2 [Auto]
PCIE Tune R3 [Auto]
PLL Tune R1 [Auto]
PLL reference voltage [Auto]
T Offset [Auto]
Sense MI Skew [Auto]
Sense MI Offset [Auto]
Promontory presence [Auto]
Clock Amplitude [Auto]
CLDO VDDP voltage [Auto]
CPU Core Voltage [Auto]
CPU SOC Voltage [Manual mode]
- VDDSOC Voltage Override [1.12500]
DRAM Voltage [1.47000]
CLDO VDDG voltage [1.075]
1.8V PLL Voltage [Auto]
1.05V SB Voltage [Auto]
TPM Device Selection [Discrete TPM]
Erase fTPM NV for factory reset [Enabled]
PSS Support [Auto]
SVM Mode [Disabled]
Onboard LED [Enabled]
Q-Code LED Function [Enabled]
Hyper kit Mode [Disabled]
SATA Port Enable [Enabled]
SATA Mode [AHCI]
NVMe RAID mode [Disabled]
SMART Self Test [Enabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Super I/O Clock Skew [Auto]
HD Audio Controller [Enabled]
PCIEX4_3 Bandwidth [Auto]
PCIEX8_2：X4/X4 Mode [Auto]
PCIEX16_1 Mode [Auto]
PCIEX8_2 Mode [Auto]
PCIEX4_3 Mode [Auto]
M.2 Link Mode [Auto]
SB Link Mode [Auto]
Asmedia USB 3.1 Controller [Enabled]
When system is in working state [On]
In sleep, hibernate and soft off states [On]
Intel LAN Controller [Enabled]
Intel LAN OPROM [Disabled]
USB Type C Power Switch for USB3.1_E1 [Auto]
USB Type C Power Switch for USB3.1_EC2 [Auto]
ErP Ready [Disabled]
Restore On AC Power Loss [Power Off]
Power On By PCI-E/PCI [Disabled]
Power On By RTC [Disabled]
Network Stack [Disabled]
Device [Crucial_CT512MX100SSD1]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
USB Mass Storage Driver Support [Enabled]
USB 2.0 [Auto]
USB3.1_E1 [Enabled]
USB3_1 [Enabled]
USB3_2 [Enabled]
USB3_3 [Enabled]
USB3_4 [Enabled]
USB3_5 [Enabled]
USB3_6 [Enabled]
USB3_7 [Enabled]
USB3_8 [Enabled]
USB3_9 [Enabled]
USB3_10 [Enabled]
USB2_11 [Enabled]
USB2_12 [Enabled]
USB2_13 [Enabled]
USB2_14 [Enabled]
USB_15 [Enabled]
USB_16 [Enabled]
CPU Temperature [Monitor]
MotherBoard Temperature [Monitor]
VRM Temperature [Monitor]
PCH Temperature [Monitor]
T_Sensor1 Temperature [Monitor]
CPU Fan Speed [Monitor]
Chassis Fan 1 Speed [Monitor]
Chassis Fan 2 Speed [Monitor]
Chassis Fan 3 Speed [Monitor]
W_PUMP+ Speed [Monitor]
CPU Optional Fan Speed [Monitor]
AIO_PUMP Speed [Monitor]
W_FLOW Speed [Monitor]
W_IN Temperature [Monitor]
W_OUT Temperature [Monitor]
CPU Core Voltage [Monitor]
3.3V Voltage [Monitor]
5V Voltage [Monitor]
12V Voltage [Monitor]
CPU Q-Fan Control [PWM Mode]
CPU Fan Smoothing Up/Down Time [0 sec]
CPU Fan Speed Lower Limit [200 RPM]
CPU Fan Profile [Manual]
CPU Upper Temperature [75]
CPU Fan Max. Duty Cycle (%) [100]
CPU Middle Temperature [60]
CPU Fan Middle. Duty Cycle (%) [20]
CPU Lower Temperature [45]
CPU Fan Min. Duty Cycle (%) [14]
Chassis Fan 1 Q-Fan Control [Auto]
Chassis Fan 1 Q-Fan Source [CPU]
Chassis Fan 1 Smoothing Up/Down Time [0 sec]
Chassis Fan 1 Speed Low Limit [200 RPM]
Chassis Fan 1 Profile [Manual]
Chassis Fan 1 Upper Temperature [75]
Chassis Fan 1 Max. Duty Cycle (%) [100]
Chassis Fan 1 Middle Temperature [60]
Chassis Fan 1 Middle. Duty Cycle (%) [20]
Chassis Fan 1 Lower Temperature [45]
Chassis Fan 1 Min. Duty Cycle (%) [10]
Chassis Fan 2 Q-Fan Control [Auto]
Chassis Fan 2 Q-Fan Source [CPU]
Chassis Fan 2 Smoothing Up/Down Time [0 sec]
Chassis Fan 2 Speed Low Limit [200 RPM]
Chassis Fan 2 Profile [Manual]
Chassis Fan 2 Upper Temperature [75]
Chassis Fan 2 Max. Duty Cycle (%) [100]
Chassis Fan 2 Middle Temperature [60]
Chassis Fan 2 Middle. Duty Cycle (%) [20]
Chassis Fan 2 Lower Temperature [50]
Chassis Fan 2 Min. Duty Cycle (%) [5]
Chassis Fan 3 Q-Fan Control [Auto]
Chassis Fan 3 Q-Fan Source [CPU]
Chassis Fan 3 Smoothing Up/Down Time [0 sec]
Chassis Fan 3 Speed Low Limit [200 RPM]
Chassis Fan 3 Profile [Manual]
Chassis Fan 3 Upper Temperature [75]
Chassis Fan 3 Max. Duty Cycle (%) [100]
Chassis Fan 3 Middle Temperature [60]
Chassis Fan 3 Middle. Duty Cycle (%) [20]
Chassis Fan 3 Lower Temperature [45]
Chassis Fan 3 Min. Duty Cycle (%) [10]
AIO_PUMP/W_PUMP+ Control [Disabled]
USB3_1 [Enabled]
USB3_2 [Enabled]
USB3_3 [Enabled]
USB3_4 [Enabled]
PSPP Policy [Auto]
Fast Boot [Enabled]
NVMe Support [Enabled]
Next Boot after AC Power Loss [Normal Boot]
AMI Native NVMe Driver Support [Enabled]
Boot Logo Display [Enabled]
POST Delay Time [0 sec]
Boot up NumLock State [Enabled]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Enabled]
Interrupt 19 Capture [Disabled]
Setup Mode [Advanced Mode]
Launch CSM [Enabled]
Boot Device Control [UEFI and Legacy OPROM]
Boot from Network Devices [Legacy only]
Boot from Storage Devices [Legacy only]
Boot from PCI-E Expansion Devices [Legacy only]
OS Type [Other OS]
Setup Animator [Disabled]
Load from Profile [2]
Profile Name [3600c14xfr]
Save to Profile [1]
CPU Core Voltage [Auto]
VDDSOC Voltage [Auto]
1.8V PLL Voltage [Auto]
BCLK Frequency [Auto]
CPU Ratio [Auto]
DIMM Slot Number [DIMM_A2]
Bus Interface [PCIEX16/X8_1]
Custom Pstate0 [Auto]
CCD Control [Auto]
Core control [Auto]
SMT Control [Auto]
L1 Stream HW Prefetcher [Auto]
L2 Stream HW Prefetcher [Auto]
Core Watchdog Timer Enable [Auto]
Platform First Error Handling [Enabled]
Core Performance Boost [Auto]
Global C-state Control [Auto]
Power Supply Idle Control [Auto]
SEV ASID Count [Auto]
SEV-ES ASID Space Limit Control [Auto]
Streaming Stores Control [Auto]
ACPI _CST C1 Declaration [Auto]
MCA error thresh enable [Auto]
PPIN Opt-in [Auto]
DRAM scrub time [Auto]
Poison scrubber control [Auto]
Redirect scrubber control [Auto]
Redirect scrubber limit [Auto]
NUMA nodes per socket [Auto]
Memory interleaving [Auto]
Memory interleaving size [Auto]
1TB remap [Auto]
DRAM map inversion [Auto]
ACPI SRAT L3 Cache As NUMA Domain [Auto]
ACPI SLIT Distance Control [Auto]
ACPI SLIT remote relative distance [Auto]
GMI encryption control [Auto]
xGMI encryption control [Auto]
CAKE CRC perf bounds Control [Auto]
4-link xGMI max speed [Auto]
3-link xGMI max speed [Auto]
Disable DF to external IP SyncFloodPropagation [Auto]
Disable DF sync flood propagation [Auto]
CC6 memory region encryption [Auto]
Memory Clear [Auto]
Overclock [Auto]
Power Down Enable [Enabled]
Cmd2T [1T]
Gear Down Mode [Enabled]
CAD Bus Timing User Controls [Manual]
AddrCmdSetup [0]
CsOdtSetup [0]
CkeSetup [0]
CAD Bus Drive Strength User Controls [Manual]
ClkDrvStren [24.0 Ohm]
AddrCmdDrvStren [24.0 Ohm]
CsOdtDrvStren [24.0 Ohm]
CkeDrvStren [24.0 Ohm]
Data Bus Configuration User Controls [Manual]
RttNom [RZQ/7]
RttWr [RZQ/3]
RttPark [RZQ/1]
Data Poisoning [Auto]
DRAM Post Package Repair [Disable]
RCD Parity [Disabled]
DRAM Address Command Parity Retry [Disabled]
Write CRC Enable [Disabled]
DRAM Write CRC Enable and Retry Limit [Disabled]
Disable Memory Error Injection [True]
DRAM ECC Symbol Size [Auto]
DRAM ECC Enable [Auto]
DRAM UECC Retry [Auto]
TSME [Auto]
Data Scramble [Auto]
DFE Read Training [Auto]
FFE Write Training [Auto]
PMU Pattern Bits Control [Auto]
Chipselect Interleaving [Auto]
BankGroupSwap [Auto]
BankGroupSwapAlt [Auto]
Address Hash Bank [Auto]
Address Hash CS [Auto]
Address Hash Rm [Auto]
SPD Read Optimization [Enabled]
MBIST Enable [Disabled]
Pattern Select [PRBS]
Pattern Length [3]
Aggressor Channel [1 Aggressor Channel]
Aggressor Static Lane Control [Disabled]
Target Static Lane Control [Disabled]
Worst Case Margin Granularity [Per Chip Select]
Read Voltage Sweep Step Size [1]
Read Timing Sweep Step Size [1]
Write Voltage Sweep Step Size [1]
Write Timing Sweep Step Size [1]
IOMMU [Auto]
Precision Boost Overdrive [Enable]
Precision Boost Overdrive Scalar [Manual]
customized Precision Boost Overdrive Scalar [10X]
FCLK Frequency [1800MHz]
SOC OVERCLOCK VID [0]
UCLK DIV1 MODE [UCLK==MEMCLK]
VDDP Voltage Control [Auto]
VDDG Voltage Control [Auto]
SoC/Uncore OC Mode [Enabled]
ACS Enable [Auto]
PCIe ARI Support [Auto]
PCIe Ten Bit Tag Support [Auto]
HD Audio Enable [Auto]
cTDP Control [Auto]
Fan Table Control [Auto]
EfficiencyModeEn [Auto]
Package Power Limit Control [Auto]
APBDIS [Auto]
DF Cstates [Auto]
CPPC [Auto]
BoostFmaxEn [Auto]
NBIO RAS Global Control [Auto]
NBIO RAS Control [Auto]
Egress Poison Severity High [30011]
Egress Poison Severity Low [4]
NBIO SyncFlood Generation [Auto]
NBIO SyncFlood Reporting [Auto]
Egress Poison Mask High [fffcffff]
Egress Poison Mask Low [fffffffb]
Uncorrected Converted to Poison Enable Mask High [30000]
Uncorrected Converted to Poison Enable Mask Low [4]
System Hub Watchdog Timer [a28]
SLINK Read Response OK [Disabled]
SLINK Read Response Error Handling [Log Errors in MCA]
Log Poison Data from SLINK [Disabled]
PCIe Aer Reporting Mechanism [Auto]
Edpc Control [Disabled]
NBIO Poison Consumption [Auto]
Sync Flood on PCIe Fatal Error [Auto]
Enable AER Cap [Auto]
Early Link Speed [Auto]
Presence Detect Select mode [Auto]
SATA Enable [Auto]
Sata RAS Support [Auto]
Sata Disabled AHCI Prefetch Function [Auto]
Aggresive SATA Device Sleep Port 0 [Auto]
Aggresive SATA Device Sleep Port 1 [Auto]
XHCI Controller0 enable [Auto]
USB ecc SMI Enable [Auto]
XHCI2 enable (Socket1) [Auto]
XHCI3 enable (Socket1) [Auto]
Ac Loss Control [Auto]
I2C 2 Enable [Auto]
I2C 3 Enable [Auto]
ESPI Enable [Auto]
ALink RAS Support [Auto]
Reset after sync flood [Auto]
ABL Console Out Control [Auto]
3666C16
[2019/08/05 21:27:36]
Ai Overclock Tuner [Manual]
BCLK Frequency [100.0000]
BCLK_Divider [Auto]
CPU Core Ratio [Auto]
Performance Bias [Auto]
Memory Frequency [DDR4-3666MHz]
FCLK Frequency [1833MHz]
Core Performance Boost [Enabled]
SMT Mode [Disabled]
EPU Power Saving Mode [Disabled]
TPU [Keep Current Settings]
Mem Over Clock Fail Count [Auto]
DRAM CAS# Latency [16]
DRAM RAS# to CAS# Read Delay [16]
DRAM RAS# to CAS# Write Delay [16]
DRAM RAS# PRE Time [16]
DRAM RAS# ACT Time [32]
Trc [48]
TrrdS [6]
TrrdL [8]
Tfaw [35]
TwtrS [4]
TwtrL [12]
Twr [12]
Trcpage [Auto]
TrdrdScl [4]
TwrwrScl [4]
Trfc [293]
Trfc2 [218]
Trfc4 [134]
Tcwl [16]
Trtp [8]
Trdwr [8]
Twrrd [5]
TwrwrSc [1]
TwrwrSd [7]
TwrwrDd [7]
TrdrdSc [1]
TrdrdSd [5]
TrdrdDd [5]
Tcke [1]
ProcODT [53.3 ohm]
Cmd2T [1T]
Gear Down Mode [Enabled]
Power Down Enable [Disabled]
RttNom [Rtt_Nom Disable]
RttWr [RZQ/3]
RttPark [RZQ/1]
MemAddrCmdSetup [60]
MemCsOdtSetup [60]
MemCkeSetup [60]
MemCadBusClkDrvStren [24.0 Ohm]
MemCadBusAddrCmdDrvStren [24.0 Ohm]
MemCadBusCsOdtDrvStren [24.0 Ohm]
MemCadBusCkeDrvStren [24.0 Ohm]
CPU Load-line Calibration [Auto]
CPU Load-line Calibration [Auto]
CPU Current Capability [140%]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Disabled]
Active Frequency Mode [Disabled]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Extreme]
CPU Power Thermal Control [120]
VDDSOC Load-line Calibration [Auto]
VDDSOC Load-line Calibration [Auto]
VDDSOC Current Capability [140%]
VDDSOC Switching Frequency [Auto]
VDDSOC Phase Control [Extreme]
DRAM Current Capability [130%]
DRAM Power Phase Control [Extreme]
DRAM Switching Frequency [Auto]
DRAM VBoot Voltage [1.47000]
VTTDDR Voltage [Auto]
VPP_MEM Voltage [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
VDDP Voltage [Auto]
VDDP Standby Voltage [Auto]
1.8V Standby Voltage [Auto]
CPU 3.3v AUX [Auto]
2.5V SB Voltage [Auto]
DRAM R1 Tune [Auto]
DRAM R2 Tune [Auto]
DRAM R3 Tune [Auto]
DRAM R4 Tune [Auto]
PCIE Tune R1 [Auto]
PCIE Tune R2 [Auto]
PCIE Tune R3 [Auto]
PLL Tune R1 [Auto]
PLL reference voltage [Auto]
T Offset [Auto]
Sense MI Skew [Auto]
Sense MI Offset [Auto]
Promontory presence [Auto]
Clock Amplitude [Auto]
CLDO VDDP voltage [Auto]
CPU Core Voltage [Auto]
CPU SOC Voltage [Manual mode]
- VDDSOC Voltage Override [1.12500]
DRAM Voltage [1.47000]
CLDO VDDG voltage [1.075]
1.8V PLL Voltage [Auto]
1.05V SB Voltage [Auto]
TPM Device Selection [Discrete TPM]
Erase fTPM NV for factory reset [Enabled]
PSS Support [Auto]
SVM Mode [Disabled]
Onboard LED [Enabled]
Q-Code LED Function [Enabled]
Hyper kit Mode [Disabled]
SATA Port Enable [Enabled]
SATA Mode [AHCI]
NVMe RAID mode [Disabled]
SMART Self Test [Enabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Super I/O Clock Skew [Disabled]
HD Audio Controller [Enabled]
PCIEX4_3 Bandwidth [Auto]
PCIEX8_2：X4/X4 Mode [Auto]
PCIEX16_1 Mode [Auto]
PCIEX8_2 Mode [Auto]
PCIEX4_3 Mode [Auto]
M.2 Link Mode [Auto]
SB Link Mode [Auto]
Asmedia USB 3.1 Controller [Enabled]
When system is in working state [On]
In sleep, hibernate and soft off states [On]
Intel LAN Controller [Enabled]
Intel LAN OPROM [Disabled]
USB Type C Power Switch for USB3.1_E1 [Auto]
USB Type C Power Switch for USB3.1_EC2 [Auto]
ErP Ready [Disabled]
Restore On AC Power Loss [Power Off]
Power On By PCI-E/PCI [Disabled]
Power On By RTC [Disabled]
Network Stack [Disabled]
Device [Crucial_CT512MX100SSD1]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
USB Mass Storage Driver Support [Enabled]
USB3.1_E1 [Enabled]
USB3_1 [Enabled]
USB3_2 [Enabled]
USB3_3 [Enabled]
USB3_4 [Enabled]
USB3_5 [Enabled]
USB3_6 [Enabled]
USB3_7 [Enabled]
USB3_8 [Enabled]
USB3_9 [Enabled]
USB3_10 [Enabled]
USB2_11 [Enabled]
USB2_12 [Enabled]
USB2_13 [Enabled]
USB2_14 [Enabled]
USB_15 [Enabled]
USB_16 [Enabled]
CPU Temperature [Monitor]
MotherBoard Temperature [Monitor]
VRM Temperature [Monitor]
PCH Temperature [Monitor]
T_Sensor1 Temperature [Monitor]
CPU Fan Speed [Monitor]
Chassis Fan 1 Speed [Monitor]
Chassis Fan 2 Speed [Monitor]
Chassis Fan 3 Speed [Monitor]
W_PUMP+ Speed [Monitor]
CPU Optional Fan Speed [Monitor]
AIO_PUMP Speed [Monitor]
W_FLOW Speed [Monitor]
W_IN Temperature [Monitor]
W_OUT Temperature [Monitor]
CPU Core Voltage [Monitor]
3.3V Voltage [Monitor]
5V Voltage [Monitor]
12V Voltage [Monitor]
CPU Q-Fan Control [PWM Mode]
CPU Fan Smoothing Up/Down Time [0 sec]
CPU Fan Speed Lower Limit [200 RPM]
CPU Fan Profile [Manual]
CPU Upper Temperature [75]
CPU Fan Max. Duty Cycle (%) [100]
CPU Middle Temperature [60]
CPU Fan Middle. Duty Cycle (%) [20]
CPU Lower Temperature [45]
CPU Fan Min. Duty Cycle (%) [14]
Chassis Fan 1 Q-Fan Control [Auto]
Chassis Fan 1 Q-Fan Source [CPU]
Chassis Fan 1 Smoothing Up/Down Time [0 sec]
Chassis Fan 1 Speed Low Limit [200 RPM]
Chassis Fan 1 Profile [Manual]
Chassis Fan 1 Upper Temperature [75]
Chassis Fan 1 Max. Duty Cycle (%) [100]
Chassis Fan 1 Middle Temperature [60]
Chassis Fan 1 Middle. Duty Cycle (%) [20]
Chassis Fan 1 Lower Temperature [45]
Chassis Fan 1 Min. Duty Cycle (%) [10]
Chassis Fan 2 Q-Fan Control [Auto]
Chassis Fan 2 Q-Fan Source [CPU]
Chassis Fan 2 Smoothing Up/Down Time [0 sec]
Chassis Fan 2 Speed Low Limit [200 RPM]
Chassis Fan 2 Profile [Manual]
Chassis Fan 2 Upper Temperature [75]
Chassis Fan 2 Max. Duty Cycle (%) [100]
Chassis Fan 2 Middle Temperature [60]
Chassis Fan 2 Middle. Duty Cycle (%) [20]
Chassis Fan 2 Lower Temperature [50]
Chassis Fan 2 Min. Duty Cycle (%) [5]
Chassis Fan 3 Q-Fan Control [Auto]
Chassis Fan 3 Q-Fan Source [CPU]
Chassis Fan 3 Smoothing Up/Down Time [0 sec]
Chassis Fan 3 Speed Low Limit [200 RPM]
Chassis Fan 3 Profile [Manual]
Chassis Fan 3 Upper Temperature [75]
Chassis Fan 3 Max. Duty Cycle (%) [100]
Chassis Fan 3 Middle Temperature [60]
Chassis Fan 3 Middle. Duty Cycle (%) [20]
Chassis Fan 3 Lower Temperature [45]
Chassis Fan 3 Min. Duty Cycle (%) [10]
AIO_PUMP/W_PUMP+ Control [Disabled]
USB3_1 [Enabled]
USB3_2 [Enabled]
USB3_3 [Enabled]
USB3_4 [Enabled]
PSPP Policy [Auto]
Fast Boot [Enabled]
NVMe Support [Enabled]
Next Boot after AC Power Loss [Normal Boot]
AMI Native NVMe Driver Support [Enabled]
Boot Logo Display [Enabled]
POST Delay Time [0 sec]
Boot up NumLock State [Enabled]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Enabled]
Interrupt 19 Capture [Disabled]
Setup Mode [Advanced Mode]
Launch CSM [Enabled]
Boot Device Control [UEFI and Legacy OPROM]
Boot from Network Devices [Legacy only]
Boot from Storage Devices [Legacy only]
Boot from PCI-E Expansion Devices [Legacy only]
OS Type [Other OS]
Setup Animator [Disabled]
Load from Profile [6]
Profile Name [3666c16 53ohm]
Save to Profile [6]
CPU Core Voltage [Auto]
VDDSOC Voltage [Auto]
1.8V PLL Voltage [Auto]
BCLK Frequency [Auto]
CPU Ratio [Auto]
DIMM Slot Number [DIMM_A2]
Bus Interface [PCIEX16/X8_1]
Custom Pstate0 [Auto]
CCD Control [Auto]
Core control [Auto]
SMT Control [Auto]
L1 Stream HW Prefetcher [Enable]
L2 Stream HW Prefetcher [Enable]
Core Watchdog Timer Enable [Auto]
Platform First Error Handling [Enabled]
Core Performance Boost [Auto]
Global C-state Control [Auto]
Power Supply Idle Control [Auto]
SEV ASID Count [Auto]
SEV-ES ASID Space Limit Control [Auto]
Streaming Stores Control [Auto]
ACPI _CST C1 Declaration [Auto]
MCA error thresh enable [Auto]
PPIN Opt-in [Auto]
DRAM scrub time [Auto]
Poison scrubber control [Auto]
Redirect scrubber control [Auto]
Redirect scrubber limit [Auto]
NUMA nodes per socket [Auto]
Memory interleaving [Auto]
Memory interleaving size [512 Bytes]
1TB remap [Auto]
DRAM map inversion [Auto]
ACPI SRAT L3 Cache As NUMA Domain [Auto]
ACPI SLIT Distance Control [Auto]
ACPI SLIT remote relative distance [Auto]
GMI encryption control [Auto]
xGMI encryption control [Auto]
CAKE CRC perf bounds Control [Auto]
4-link xGMI max speed [Auto]
3-link xGMI max speed [Auto]
Disable DF to external IP SyncFloodPropagation [Auto]
Disable DF sync flood propagation [Auto]
CC6 memory region encryption [Auto]
Memory Clear [Disabled]
Overclock [Auto]
Power Down Enable [Disabled]
Cmd2T [1T]
Gear Down Mode [Enabled]
CAD Bus Timing User Controls [Manual]
AddrCmdSetup [0]
CsOdtSetup [0]
CkeSetup [0]
CAD Bus Drive Strength User Controls [Manual]
ClkDrvStren [24.0 Ohm]
AddrCmdDrvStren [24.0 Ohm]
CsOdtDrvStren [24.0 Ohm]
CkeDrvStren [24.0 Ohm]
Data Bus Configuration User Controls [Manual]
RttNom [Rtt_Nom Disable]
RttWr [RZQ/3]
RttPark [RZQ/1]
Data Poisoning [Auto]
DRAM Post Package Repair [Disable]
RCD Parity [Disabled]
DRAM Address Command Parity Retry [Disabled]
Write CRC Enable [Disabled]
DRAM Write CRC Enable and Retry Limit [Disabled]
Disable Memory Error Injection [True]
DRAM ECC Symbol Size [Auto]
DRAM ECC Enable [Auto]
DRAM UECC Retry [Auto]
TSME [Auto]
Data Scramble [Auto]
DFE Read Training [Enable]
FFE Write Training [Enable]
PMU Pattern Bits Control [Manual]
PMU Pattern Bits [a]
Chipselect Interleaving [Auto]
BankGroupSwap [Disabled]
BankGroupSwapAlt [Disabled]
Address Hash Bank [Auto]
Address Hash CS [Auto]
Address Hash Rm [Auto]
SPD Read Optimization [Enabled]
MBIST Enable [Disabled]
Pattern Select [PRBS]
Pattern Length [3]
Aggressor Channel [1 Aggressor Channel]
Aggressor Static Lane Control [Disabled]
Target Static Lane Control [Disabled]
Worst Case Margin Granularity [Per Chip Select]
Read Voltage Sweep Step Size [1]
Read Timing Sweep Step Size [1]
Write Voltage Sweep Step Size [1]
Write Timing Sweep Step Size [1]
IOMMU [Auto]
Precision Boost Overdrive [Enable]
Precision Boost Overdrive Scalar [Manual]
customized Precision Boost Overdrive Scalar [10X]
FCLK Frequency [1833MHz]
SOC OVERCLOCK VID [0]
UCLK DIV1 MODE [UCLK==MEMCLK]
VDDP Voltage Control [Auto]
VDDG Voltage Control [Auto]
SoC/Uncore OC Mode [Enabled]
ACS Enable [Auto]
PCIe ARI Support [Auto]
PCIe Ten Bit Tag Support [Auto]
HD Audio Enable [Auto]
cTDP Control [Auto]
Fan Table Control [Auto]
EfficiencyModeEn [Auto]
Package Power Limit Control [Auto]
APBDIS [Auto]
DF Cstates [Auto]
CPPC [Auto]
BoostFmaxEn [Auto]
NBIO RAS Global Control [Auto]
NBIO RAS Control [Auto]
Egress Poison Severity High [30011]
Egress Poison Severity Low [4]
NBIO SyncFlood Generation [Auto]
NBIO SyncFlood Reporting [Auto]
Egress Poison Mask High [fffcffff]
Egress Poison Mask Low [fffffffb]
Uncorrected Converted to Poison Enable Mask High [30000]
Uncorrected Converted to Poison Enable Mask Low [4]
System Hub Watchdog Timer [a28]
SLINK Read Response OK [Disabled]
SLINK Read Response Error Handling [Log Errors in MCA]
Log Poison Data from SLINK [Disabled]
PCIe Aer Reporting Mechanism [Auto]
Edpc Control [Disabled]
NBIO Poison Consumption [Auto]
Sync Flood on PCIe Fatal Error [Auto]
Enable AER Cap [Auto]
Early Link Speed [Auto]
Presence Detect Select mode [Auto]
SATA Enable [Auto]
Sata RAS Support [Auto]
Sata Disabled AHCI Prefetch Function [Auto]
Aggresive SATA Device Sleep Port 0 [Auto]
Aggresive SATA Device Sleep Port 1 [Auto]
XHCI Controller0 enable [Auto]
USB ecc SMI Enable [Auto]
XHCI2 enable (Socket1) [Auto]
XHCI3 enable (Socket1) [Auto]
Ac Loss Control [Auto]
I2C 2 Enable [Auto]
I2C 3 Enable [Auto]
ESPI Enable [Auto]
ALink RAS Support [Auto]
Reset after sync flood [Auto]
ABL Console Out Control [Auto]
Good Luck !
Thanks
