Dubs
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
SOME RYZEN 7 1700 OVERCLOCKING!
- Thread starter Gibbo
- Start date
Soldato
Stick memtest on a usb stick and run that. Should take around 4 hours.
http://www.memtest86.com/download.htm
Soldato
Caporegime
Soldato
I'll see your 7 and raise you 184.
Nice! No matter how hard I try I cannot get this stable at 4.0.
3.9 with 2933 will do me for now. I dont mind pumping extra voltage in, this only need to last till zen 2
Soldato
Aye but mine is at 3.8
Soldato
What memory?
Soldato
3200
Associate
- Joined
- 2 Nov 2015
- Posts
- 85
How much did you pay in total for that kind of set up?
Soldato
Was that to me?
Soldato
What memory is that? I'm looking to upgrade mine. 2933 seems to be the limit. And even then it's sketchy
Soldato
This, works fine on 1001
https://www.overclockers.co.uk/cors...hannel-kit-black-cmk16gx4m2b32-my-456-cs.html
Associate
Hi all, I have now completed 2 hrs of prime95 @3.925Ghz - 1.46 VCore - SOC 1.200 - 2666 mem C16 1.35V.
I'm using C6H mobo
Ryzen 1700
G.Skill Trident Z 32GB (2x16) 3000Mhz CAS14 DDR4 (F4-3000C14D-32GTZ)
Noctua NH D15 - Thermal Grizzly Kyronaut.
I'm using voltage offset + 0.23875. I have all the LLC's set to Level4 and phase settings to extreme, phase/VRM frequency's left at auto.
All the c states and power saving turned off, and core performance boost turned off (in both places). not using pstates at the moment.
Thats about as low as I can get the VCore, will try 1.15 on SOC next, then I will start on the memory, its just running stock 2666 settings at the moment.
I cant run 4.0Ghz, even had 1.65V VCore breifly! But still wont run Prime95 or realbench for any length of time 3-4 mins usually.
I'm using C6H mobo
Ryzen 1700
G.Skill Trident Z 32GB (2x16) 3000Mhz CAS14 DDR4 (F4-3000C14D-32GTZ)
Noctua NH D15 - Thermal Grizzly Kyronaut.
I'm using voltage offset + 0.23875. I have all the LLC's set to Level4 and phase settings to extreme, phase/VRM frequency's left at auto.
All the c states and power saving turned off, and core performance boost turned off (in both places). not using pstates at the moment.
Thats about as low as I can get the VCore, will try 1.15 on SOC next, then I will start on the memory, its just running stock 2666 settings at the moment.
I cant run 4.0Ghz, even had 1.65V VCore breifly! But still wont run Prime95 or realbench for any length of time 3-4 mins usually.
Associate
Further update guys.
Team Groups had errors on them after testing. Just installed some Corsair Vengence form the QVL and system is running. Now working on clocking, got a dirty 3.9 but the volts are too high so going to work on reducing them now.
Thanks for all you help with this.
Soldato
Good to hear mate. What voltage are you looking at? For me it seems i need 1.44 for a 3.9 :/
Meh, my Pentium 75 needed 3.5v to do 120MHz, ran fine for years ^^
Associate
Currently testing at 1.325v BIOS and 1.33v load (LLC lvl 4). I tend to try 3x Cinebench first as that will tell you if you are wide of the mark or not. That passed, now doing 30 mins Realbench. If that passes I'll up it to an 2 hours. I'll then start gaming on it and see how it goes. If it crashes in game, I know I need to tickle the volts up a notch.
Very nice, I have tested only 1.3v yesterday on 3.9GHz, 4GHz needs more than 1.4v, which is fine, under custom water loop it is chilled.
If you could, put the 4GHz details on here so I can try that as well please.