The Intel Quadcore Database

fornowagain · 12 Nov 2007 at 18:23

young said:
are they load temps?! jesus mate, you've got an awesome overclock there!

Yes that's load at 3.6GHz, temps creep up a bit after a few hours.

It's not too bad for air. It's stable enough to bench at 4GHz, but the voltage and temps gives me the HeBeGeBees. 3.9GHz is about the sane limit at 1.64v, tops 70C.

w3bbo · 13 Nov 2007 at 12:30

Updated.

young · 13 Nov 2007 at 14:31

fornowagain, what volts do you use to get that? whats your case? fans? etc

fornowagain · 14 Nov 2007 at 01:15

w3bbo said:
Updated.

Thanks

young said:
fornowagain, what volts do you use to get that? whats your case? fans? etc

4GHz? Around 1.67v, but temps go nuts. Needs water for that kind of clock. The PWM would need special attention as well, mosfet blocks. The Quad pulls a lot of current and Abit didn't really address the IP35's PWM cooling imho.

The case is a TT Mozart. Using 10 x 120mm fans on a home made speed controller.

young · 14 Nov 2007 at 01:47

i see you've got a tiny cooler on your chipset, where did you get that?

is it noise with those 3 fans on your CPU?

fornowagain · 14 Nov 2007 at 02:06

young said:
i see you've got a tiny cooler on your chipset, where did you get that?

is it noise with those 3 fans on your CPU?

Noisy? No, I use the motherboard to control the CPU fan speeds, the second fan only kicks in at high temps. That and Scythe S-FLEX fan which are whisper quiet.

http://www.overclockers.co.uk/showproduct.php?prodid=FG-030-AK&groupid=701&catid=57&subcat=818

ChrisD. · 14 Nov 2007 at 13:13

How do you get that fancy little window for temps in Everest?

Jleo · 14 Nov 2007 at 14:16

Its a Vista feature goto File>preferences to get this window then activate, to get it to standalone just lift it from your Vista side bar.

ChrisD. · 14 Nov 2007 at 15:09

That's very nifty, thanks for that mate.

Devious · 15 Nov 2007 at 18:05

CPU - Q6600
Revison - G0
FPO# - L737B186
Clockspeed - 4014
Vcore - 1.504
Vid (core temp) - 1.2125
Motherboard - Asus P5K Premium
Cooling - Custom Water
Thermal paste used - Shin-Etsu MicroSi
CPU Temp - 50 (Avg)

easyrider · 15 Nov 2007 at 20:15

Devious said:
CPU - Q6600
Revison - G0
FPO# - L737B186
Clockspeed - 4014
Vcore - 1.504
Vid (core temp) - 1.2125
Motherboard - Asus P5K Premium
Cooling - Custom Water
Thermal paste used - Shin-Etsu MicroSi
CPU Temp - 50 (Avg)

Very impressive Devious.

To get 4ghz with that Vcore is impressive.

Congrats on a great clock

w3bbo · 15 Nov 2007 at 21:58

N1 Devious. looks like the new batches are *** clockers!

Dr Who · 17 Nov 2007 at 13:23

some mighty impressive results in here, respect guys

easyrider · 17 Nov 2007 at 14:35

Have you updated the table yet w3bbo?

w3bbo · 17 Nov 2007 at 20:47

Locky · 17 Nov 2007 at 21:58

ive found a peach of a chip, 1.200VID, priming at 1.34v @ 3.6ghz, gunna try lower volts.

Devious · 17 Nov 2007 at 22:11

TiZoR said:
ive found a peach of a chip, 1.200VID, priming at 1.34v @ 3.6ghz, gunna try lower volts.

Nice, what batch is it ?

w3bbo · 17 Nov 2007 at 22:21

N1 Tizor. I here the 'R's are very, very good batches.

Devious · 17 Nov 2007 at 22:24

w3bbo said:
N1 Tizor. I here the 'R's are very, very good batches.

I thought the R's were a typo at first

Locky · 17 Nov 2007 at 22:28

it isnt the R one ive got, its A stepping

i never tried the R stepping one, its on the MM as we speak