The Intel Quadcore Database

[CyZMyAssBaby]

I would agree there is more to the chip

1.408v under prime load
1.3125 (Vid)

have you tried loosening the Geil timings to 5-5-5-23 as they are cas4 using 2T out of interest

 

[Servo]

Hi, no these are cas 5.5.5.15, it's the 2 x 2 gig kit. At those timings they do upto 1000 (not tried further), I posted a prime on them in the memory section. They will do 4.4.4.15 @ 800 without issue's.

I've just moved them back to my ds4.

 

[tsinc80697]

Hopefully be putting up some data here over the next few days.
Just sorted out my CPU and it is currently at 46-46-49-49 - 3600mhz - 1.384v - under Prime load! I was hitting 60c on my old rad and thermal paste, and this loop now has a GPU in it as well!

 

[Servo]

Hopefully be putting up some data here over the next few days.
Just sorted out my CPU and it is currently at 46-46-49-49 - 3600mhz - 1.384v - under Prime load! I was hitting 60c on my old rad and thermal paste, and this loop now has a GPU in it as well!

Wow, nice drop, what did you change to?

 

[tsinc80697]

From a thermochill 120.2(just CPU in loop) to an XSPC R120-T (CPU & GPU) and from AS5 to Coollaboratory Liquid Pro.

I've only got 2 fans on this radiator as well as I don't have any screws :/ Once I get hold of some the temps may drop slightly again at load!

Not even sure if the CLP needs a set in time like AS5 needs 200hours

 

[Big.Wayne]

46-46-49-49 - 3600mhz - 1.384v - under Prime load!

Wow, nice drop, what did you change to?

Maybe the Prime test from 'Small FFTs' to 'Blend'?

[edit] If it is Small FFTs then awesome temps!

 

[tsinc80697]

The prime test is exactly the same Wayne as it was before

Just checked - definitely Small FFTs

 

[Servo]

Thats a superb setup, I'm thinking about a new rad for the matx build, I'm using a single rad at the moment, and I don't have a clue what breed it is, I bought it second hand from the forums. I think I might get away with a duel rad for the matx case, fitted external.

 

[Big.Wayne]

For the sake of clarity can you elaborate on the testing conditions? whats the ambient like? Is the build on an open bench in a cold garage or any similar 'tweaks'

Even better show me if you can (and have time!).

 

[tsinc80697]

Its sat in my room, I've got the radiator on as well as my laptop and monitor obv. Nice and warm in here so that might add to the temps slightly

Ill try and find my camera now!

 

[Servo]

That's a great result you have there!!!!!!

 

[tsinc80697]

Cant find my camera but my phone will do I suppose!

3 photos on their way, 2 of the setup and 1 of my desk just to prove its in a nice room







Ignore the messy case, need to sort out where to put the individual fan controllers and cables!

With the side panels on I am sure the temps will be lower overall as most of the air going into the case is just going straight out the side before it gets near any components

Boooo, now the sun is coming in and starting to war everything up lol!

Idle temps after 30minutes of Prime, turned it off as the sun was warming everything up and I don't want to close the curtains!

sun > overclock temps

 

[Big.Wayne]

it is currently at 46-46-49-49 - 3600mhz - 1.384v - under Prime load! I was hitting 60c on my old rad and thermal paste, and this loop now has a GPU in it as well!

Yep thats one serious set-up you have there!

You should be able to clock even higher maybe? don't think your gonna be held back by your temps

P.S: Thanks for posting pics.

 

[tsinc80697]

Yeah Ive had the CPU running at 3800mhz for a week or two, but I just wanted to check temps at a lower voltage. Will be putting it back up to atleast 3.8ghz sometime this week, just have loads of uni i work to do!

 

[Pneumonic]

looking forward to seeing what sort of temps you get... am trying very hard not to "splash" out on a serious water cooling setup atm

 

[Bikerz]

Webbo, As I have just done a new build hes my CPU no. L733A640. Thanks very much for uploading me before I gave you this detail. Tho later on today I may be entering a new score with the new case. Cheers

 

[w3bbo]

No worries m8. I cant don anything about updating the table yet as my pc upgrade is still in bits (blame intel for no x48 yet!) but as soon as its back up and running and I have the database file again I'll sort out everyones details.

Well done everyone!!

 

[Pneumonic]

*sniffle*

well am looking forward to the new build so can wait a while for the database to be updated

 

[Big.Wayne]

my pc upgrade is still in bits

Lol I know the feeling, I am waiting on an 1800w heatgun!

 

[w3bbo]

Its getting to be a pita tbh. First I thought early jan, then mid jan, now early feb. I got what I thought to be a decent price for my old setup but being without a decent pc for the last 2 weeks feels like months now and its no better not having any set date to go by. I even waxed and polished the UFO in boredom and anticipation thats how sad things are atm.

I'll hopefully be jumping back up the database once back up and running tho as I have a new quad that was supposed to put me on until yorkfield/penryn release....grrrrr! Its sadly just sat in a box as it aint much use without a mobo lol.