Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
I wouldn't do a manual offset with a Ryzen 5000 CPU. CPU's and GPU's a algorithmic controlled and it's very hard work trying to win that battle!Can someone tell me how and is it okay to dont use curve optimizer so just PBO2 auto and just lower to -0.0875mv or 0.0750mv
Im not sure is lowering vcore negative (cant find that option in bios) is the same is lowering to negative in curve optimizer
I read this from someone who has a similiar problem:
"I switched from curve optimizer to pbo2 auto and a -0,075mV negative offset. My cb23 scores went from around 22000 to 21000 and max temps went from 81c to 72c. Max single core boost effective clock remained at 4950mhz. I think you should try that. Also, warzone gaming temps went from peaks of 83-85c to peaks of 75c…"
Just check that 1.15v is not holding the performance back. Try same settings with 1.2v, and run a few benches to see whether scores remain the same. These chips are quite resilient to not-crashing, but can drop performance when undervolted by too-much.Well this is a game for someone who has a lot of time,its not me i just locked clock in ryzen master to 4500 and lower voltage to 1.15,now its under 60c ,i know i have to do this on every boot but its working for now,i might try higher clock and test voltage with RM its just easy then testing with bios,just thx to everyone trying to help
I guess 1st paste-ing was bad
https://ibb.co/q5FqnYx
https://ibb.co/cXHBQZ7
I hope this is good spreading,i did it with a finger..
https://ibb.co/1XW7z5v
I put isopropyl alcohol on my finger
I guess 1st paste-ing was bad
https://ibb.co/q5FqnYx
https://ibb.co/cXHBQZ7
I hope this is good spreading,i did it with a finger..
https://ibb.co/1XW7z5v
Lol. What the hell is that! I would have used about a quarter of that paste. Maybe less. It’s what did on my 5900x and no temp issues and my cooler is the smaller version of yours, the 240.
stock its hitting 80-83 in a sec with 75% or 100% power from arctic freezer 360
I think it sounds like a mounting pressure issue to me.Offcourse i am,are you running stock? And what excatly temp value are you reading Core temp or different value
Is the cooler "Liquid Freezer II 360 Rev 3"?You mean i did more pressure to the cpu mount more then i should be
It's either version 3 or 4 with the plates used for mounting as version 1 and 2 didn't use them.Part number is ACFRE00068B