• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

***The Official Conroe Overclocking Thread ***

Really? So my CPU isn't "above" what it should be with a arctic freezer 7 pro?

here we go:



Another tiny oc compared to you guys :)
 
Last edited:
i meant its normal for your temps to instantly plumet once you stop priming.

Id say 58 deg on an arctic cooler is a tad high for default volts.
 
What could it be:( As you said it's default volts on the OC, could it be that the HSF is not seated properly?
 
gamer, core temp is nonsense

im at stock more or less and speedfan / asus and bios give 40ish
core temp 60, dont worry about it, your temps wil be around 40

untitledmx9.jpg


running prime brings it up to 46-47, but core temp still showing same 60s
 
Last edited:
you sure your reading speedfan correctly, is it not giving the motherboard temps. temp 1 is motherboard, temp 2 is cpu's

what is your motherboard temp? 40 by anychance lol
 
Lol. Snap.

Motherboard:40
CPU: 37 :D
temp3 is -1

I thought the temp in the tray was the cpu :confused:

Right, back to ocing

Think i can put the fsb up to 400 without volt increases?
 
Jokester said:
How's everyone finding the memory dividers on the P5W DH?

Jokester
Click to expand...

im using memory deviders, everyone of them seems fine but tbh ive never really noticed any performance difference between them.
ive had rhe memory @ 266, 400 and 500 and 550 but noticed ziltch difference in performance. Then again im not serious into overclocking / benching.
 
Hmmm, must just be me, currently got my RAM at 513MHz, so there's not much more out of it, but if I drop the divider a notch it refuses to boot unless I drop it another notch again.

S&M stable at 3.1GHz and 1.35V and still going.

Jokester
 
Jokester said:
Hmmm, must just be me, currently got my RAM at 513MHz, so there's not much more out of it, but if I drop the divider a notch it refuses to boot unless I drop it another notch again.

S&M stable at 3.1GHz and 1.35V and still going.

Jokester
Click to expand...

what cpu are you using?
 
6600.

Jokester

Edit: Somewhat suspicious of my load temps of 33C (though my window is open so my room is cool). Certainly the air coming from my radiator isn't warm at all as it was with the 805D.
 
Jokester said:
6600.

Jokester

Edit: Somewhat suspicious of my load temps of 33C (though my window is open so my room is cool). Certainly the air coming from my radiator isn't warm at all as it was with the 805D.
Click to expand...

are you using probe?
 
You must log in or register to reply here.
Back
Top Bottom