***The Vapers Lounge*** 2.0

Status
Not open for further replies.
To be honest I'd only dry fire dual coils to make sure they're both firing evenly...any tips on d2 settings in temp mode to achieve this? I would use power mode but the ohms are too low.
 
Hey guys, I've bought a new mod from myepack which the post office is holding for me as I was out when they delivered, so I'll have it tomorrow. Exciting!

Meanwhile, my old Sigelei Zmax V5 is ******. It was showing no load regardless of which RBA was screwed on. The centre pin needed pulling up as it wasn't making contact. I solved it with my KF+ by unscrewing the screw at the base of the KF, it was enough to make contact and it fired.

Tonight though, I attempted to try and get a screwdriver under the gold brass bit inside the 510 connector but couldn't get a purchase on anything to pull it up and in fact ended up pushing it further down and completely dislodging it. I've no idea how to get access to the internals to properly fix it. I've taken the display screen cover off at the side but it doesn't give me enough room to fiddle inside. Any suggestions?

Here's pics of it.
http://postimg.org/gallery/1mpinuh7e/
 
Aromamiser back in stock at elegantvapour.

Cheeky buggars have upped the price by £3 though! Althigh now you can purchase 3/6ml top caps seperately which is nice. May pick one up, or just another whole atty.

After watching rips review of it just now, I've been prompted to stick at .18 23AWG build in there, vaping fantastically.
 
It is an amazing tank, the vap is just spot on, plenty of flavour and clouds, im running two of them on my DNA200's, both running 0.09ohm dual twisted 26awg Titanium horizontal coils @55w with pre heat set to 80w, but i find the flavour better using a stumpy delrin drip tip as opposed to the supplied tip.
Even a friend at work went out and bought one after trying mine.
Anyone that likes to drip should give one a try... its the closest to dripping as i think we can currently get in a RBTA.
 
V_R said:
Fancy trying this Aromamiser, its this one I want right? Velocity Style Deck is the new one?

https://www.elegantvapour.co.uk/aromamizer-rdta-velocity-style-deck-2019.html
Click to expand...

Yes mate, that is the one... though they have put the price up £3 since in bought my two :(
But well worth it...

You can also get it from the link below, its £40 but you get both the 3 post and the Velocity deck plus a free bottle of 15ml, 0 nic of ELiquid

Try code Vivd8, though not sure if its still valid... give another 8% off if its still working..
http://www.vivdvapes.co.uk/steamcrave-aromamizer-rdta-p-410.html
 
Last edited:
I have found that often when my Fasttech deliveries are delayed, its due to RM holding it in a store somewhere in england!

What did you get?
 
UKDTweak said:
Yes mate, that is the one... though they have put the price up £3 since in bought my two :(
But well worth it...

You can also get it from the link below, its £40 but you get both the 3 post and the Velocity deck plus a free bottle of 15ml, 0 nic of ELiquid

Try code Vivid8, though not sure if its still valid... give another 8% off if its still working..
http://www.vivdvapes.co.uk/steamcrave-aromamizer-rdta-p-410.html
Click to expand...

Nice one. Whats the difference in decks then? Sorry I've not been keeping up with the vaping scene....!
 
Nice one Twirly, the Evic Mini looks good.

V_R: the original Aromamizer came with a standard three post RDA style deck, the Velocity deck is just easier and better to build on especially if you want to do vertical or quad coil, they screw into the base cap and so are interchangeable.
 
The dripper is borked I think. I can't remove the top cap to get to the deck, it all appears to be machined. I'm pulling and screwing and it isn't coming off.
 
Twirlywoos said:
The dripper is borked I think. I can't remove the top cap to get to the deck, it all appears to be machined. I'm pulling and screwing and it isn't coming off.
Click to expand...

It could just be tight o-ring seals, when dry and close tight for prolonged periods, they can get Very tight. try running under warm water for a bit.
 
UKDTweak said:
It is an amazing tank, the vap is just spot on, plenty of flavour and clouds, im running two of them on my DNA200's, both running 0.09ohm dual twisted 26awg Titanium horizontal coils @55w with pre heat set to 80w, but i find the flavour better using a stumpy delrin drip tip as opposed to the supplied tip.
Even a friend at work went out and bought one after trying mine.
Anyone that likes to drip should give one a try... its the closest to dripping as i think we can currently get in a RBTA.
Click to expand...

Ditto, have a stubby delrin drip tip on top. Also using the 2 hole airflow hole band to get the preferred draw.

Very dense clouds and great flavour, I'm in love!
 
won an eleaf tc60w and melo 2 tank last night on a facebook competition, cant wait to give it a try getting a bit bored with my joyetech vt60
 
26awg Ti twisted with 24awg Kanthal is vaping beautifully in the crown RBA.

I've not got a pair of batteries with a decent charge in the so I'm getting weak battery messages but its taking 45w over a 2 second toot to hit 420F

Took a bit of trial and error on steam engine to get the right TCR for the DNA200. Cotton is still white on a dry burn test at 420F and starts to brown very slightly at 430F
 
Status
Not open for further replies.
Back
Top Bottom