***The Vapers Lounge*** 2.0

Status
Not open for further replies.
UKDTweak said:
The Kayfun4 is renowned for being bad with TC... bad contacts so the ohm readings are off or variable which will throw off TC...

I had trouble with the TI curve created by the Wire Wizard, then i noticed a link in the top corner of the page to an older Calculator and so i used it to generate a TFR and its been working great ever since, i think the link has now been removed but if you want a copy of my TFR then PM me your email and ill send it to you.

As for the Armomamizer blowing your head off, 12mg in a tank link that is a bit high, id try 6mg... but want power were you putting through it, i run Dual twisted 26awg in mine, around .08ohms and 45-55w... with 70 pre heat.
Click to expand...

Aye most Kayfuns are, but this one has the Gold Spring and ive modded it so the airflow screw also contacts when the juice flow is open.
I can take the kayfun off and on and its always the same thankfully lol.

I think the efusion settings have the old titanium profile but ill give you a trust message regarding that indeed.

And as for the Aromamizer i kinda figured it would be, but i was vaping 18mg in a Squape for a while and only just this week moved to 12mg, 18mg in a Squape took me 3 days to get used to it and then it was alright. Only reason for dropping down is to gain more flavour as you do notice the nic in most attys mutes the flavour.

Coils are just single strand duals, i was only putting 20w with 30pre heat temp at 390f to be safe.

Edit - Trust sent.
 
Last edited:
Hey guys, I'm about to buy 250ml of nicotine. I can't actually find lubrisolve nicotine that was mentioned here as being cheaper than Darkstar. Darkstar are selling 250ml of 7.2% nicotine for £16.99 + £1.49 shipping which seems very good to me, I can't imagine it being much cheaper?
Also, I can't decide whether to buy VG or PG based or if it even matters that much? Will probably get in VG though, perhaps PG might make it taste too harsh.
 
Last edited:
what ratio do you mix at? i mix everything at max vg so nic must be in vg, with concentrate being in pg it would raise pg to high with the nic also.
 
Yeah, I'll go for VG based. I'm going to be experimenting with various ratios and I don't have a fixed ratio, but I've been vaping VG/PG 70/30 recently. I'm going to mix some 50/50 though, see how that goes.
 
Merlin5 said:
Hey guys, I'm about to buy 250ml of nicotine. I can't actually find lubrisolve nicotine that was mentioned here as being cheaper than Darkstar. Darkstar are selling 250ml of 7.2% nicotine for £16.99 + £1.49 shipping which seems very good to me, I can't imagine it being much cheaper?
Also, I can't decide whether to buy VG or PG based or if it even matters that much? Will probably get in VG though, perhaps PG might make it taste too harsh.
Click to expand...

My recommendation is for PG based, it's a lot easier to work with compared to VG.
 
KnightStalker said:
SNIP
Click to expand...

Got your email and ive sent you the file, hope it works as well for you as it has for me, i run all my tanks with Ti coils at 220C using Rayon for the wick and not had a dry hit unless the resting resistance is wrong.

20w is noting for dual coils in the Armomamzier... if your TI TFR is set right then im surprised your even getting a vape at all, my single wire duals coils in the same tank take a good 30w Plus with 50w pre heat...
 
pgi947 said:
Plan to reuse some of the 50ml bottles I've acquired, what's everyone using to clean older bottles out before reusing them?
Click to expand...

I've never bothered with 100ml bottles costing ~40p each from FastTech

Just mixed this one up

Coconut (FA) 2%
Cream Fresh (FA)0.5%
Meringue (FA)0.5%
Vanilla Custard v1 (CAP)12.5%
Vienna Cream (FA)0.5%
 
Frozennova said:
I've never bothered with 100ml bottles costing ~40p each from FastTech

Just mixed this one up

Coconut (FA) 2%
Cream Fresh (FA)0.5%
Meringue (FA)0.5%
Vanilla Custard v1 (CAP)12.5%
Vienna Cream (FA)0.5%
Click to expand...

Ah I have some ordered but the bottles won't be with me until tuesday at best, wanted to get a few bottles mixed up tomorrow. I'm going to stick with 50ml for a few reasons, the main being that most concentrates I buy come in 10ml bottles, which is a nice even 20% of 50ml. Got some dragons blood and dragon slayer waiting to go in, haven't had any in ages with the pre-mix costing so much, but the concentrates are a more reasonable £3 a pop.
 
I'm all spent up now.. I'm not going to buy anything next year... lol

Brought myself 2 nv coils that wasn't in the sale
200ml of slime (25% off)
a hana one mod from uke twerbs for £40 pounds
four LG doo doo browns
and I should (touch wood) get an authentic velocity tomorrow..
 
pgi947 said:
Ah I have some ordered but the bottles won't be with me until tuesday at best, wanted to get a few bottles mixed up tomorrow. I'm going to stick with 50ml for a few reasons, the main being that most concentrates I buy come in 10ml bottles, which is a nice even 20% of 50ml. Got some dragons blood and dragon slayer waiting to go in, haven't had any in ages with the pre-mix costing so much, but the concentrates are a more reasonable £3 a pop.
Click to expand...

Even if I'm mixing 50ml I use a 100ml bottle. I normally mix in 75ml batches straight in the bottle as it gives it space to move about when I give it a good shake
 
pgi947 said:
Plan to reuse some of the 50ml bottles I've acquired, what's everyone using to clean older bottles out before reusing them?
Click to expand...

I just give them a good soak in hot water with some fairy (giving each bottle a few squeezes under the water to ensure optimum cleanage :p), then another soak without the fairy, and finally a rinse. Seems to get rid of almost all of the smell besides some strong flavours like cinnamon and menthol, but the flavour is totally unnoticeable. I use two mixing bottles for my PG/VG (they have wide necks and caps with a dripping tip + they'll fit syringe needles, perfect for refilling/dispensing from a big bottle), and one of them was used to house a botched cinnamon danish attempt (cinnamon was way more potent than I expected) while I tried to dilute it. I cleaned the VG bottle using the above, and it still stinks of cinnamon but I've never noticed it come through in any of my mixes.
 
slinxy said:
I'm all spent up now.. I'm not going to buy anything next year... lol

Brought myself 2 nv coils that wasn't in the sale
200ml of slime (25% off)
a hana one mod from uke twerbs for £40 pounds
four LG doo doo browns
and I should (touch wood) get an authentic velocity tomorrow..
Click to expand...

I've said it before and I'll say it again, it's like De Ja Vu :p

Hoping for some decent vapemail when back in the office tomorrow (should be waiting at my desk with any luck);

- FT Order - Snap Dragon Clone and various stubby drip tips
- GetVape juicebox, 150ml of cali steam
- A bunch of various wires, claptons/twisted/regular spools of n80/Ti/Kanthal/SS 316L


For you mixers out there, DarkStar Vapour have started doing big brand concentrates now at very good prices (£4.50 for 30ml before use of any codes), finally a single place to pick up cheap nic and decent concentrates!

Has anyone started stockpiling for the TPD stuff next year? I normally trade on/sell all unused kit, but going to be keeping hold of it all, just incase!
 
Ive been contacted by Anthony, the modder that made the Hydrogen sx350j mod i got at vapefest, he is making a beauty ring for free and sending it to me and also has some of the wood left and is getting a friend to make me a matching custom drip tip to use with the mod, now it may have been an expensive mod, but the after service is unlike anything ive had with an off the shelf mod, fantastic.
 
pgi947 said:
Plan to reuse some of the 50ml bottles I've acquired, what's everyone using to clean older bottles out before reusing them?
Click to expand...

I put a couple of tanks in my ultrasonic the other day and it cleaned them great but there was still a smell from old juice and it was coming from the various o rings. So I bought some steradent denture tablets, 30 tablets for £1 at tesco. Put the tanks back in the ultrasonic with warm water, dropped a tablet in which fizzed up and switched the machine on for an 8 minute cycle. I was amazed, it actually removed all scent from the o rings. I'm going to try it with my old bottles that still smell of snake oil and tiger stripe.
 
I'll give them a wash out today and see how they turn out, flavours shouldn't linger too much as nothing too powerful was in them originally.

As for ultrasonic cleaners, I was hoping to see one on Amazon's black Friday deals, but didn't :(
 
Merlin5 said:
Hey guys, I'm about to buy 250ml of nicotine. I can't actually find lubrisolve nicotine that was mentioned here as being cheaper than Darkstar. Darkstar are selling 250ml of 7.2% nicotine for £16.99 + £1.49 shipping which seems very good to me, I can't imagine it being much cheaper?
Also, I can't decide whether to buy VG or PG based or if it even matters that much? Will probably get in VG though, perhaps PG might make it taste too harsh.
Click to expand...

Lubrisolve stopped listing it in their online ebay shop some time ago and can only be ordered over the phone.

From memory last time i ordered 2 litres of Vg was £4, 2 litres of PG was £6 and a litre of 72% nicotine was £50 ish.
 
Status
Not open for further replies.
Back
Top Bottom