Soldato
- Joined
- 18 Oct 2012
- Posts
- 8,340
Another vcmt update; all i can taste is butterscotch.
That is all
That is all
***The Vapers Lounge*** 2.0
- Thread starter slick rick
- Start date
- Status
Associate
- Joined
- 5 Feb 2003
- Posts
- 903
- Location
- My Own Personal Hell
Quick note to say thanks for RX200\DNA200 advice. Went with DNA200 & Samsung 30q's. Have spent far too long changing screens and looking at stats. Might start to dabble in some temp control soon. I've seen that Ni\Ti are supposed to be a bit tricky to work with. Is SS worth looking at?
Did you get the Reuleux DNA200... good choice.
I would avoid NI200, TI and SS are far easier to work with and SS i feel its the best all round, the fact you can dry burn it or run it in power mode as well as in TC mode, makes it an all rounder, i use 25awg 317L for single wire coils and i have two reels of Claptoned 316L too, far easier to work with compared to NI200 and no funny flavour bedding in like you can get with TI.
I would avoid NI200, TI and SS are far easier to work with and SS i feel its the best all round, the fact you can dry burn it or run it in power mode as well as in TC mode, makes it an all rounder, i use 25awg 317L for single wire coils and i have two reels of Claptoned 316L too, far easier to work with compared to NI200 and no funny flavour bedding in like you can get with TI.
Novavapes Sour Fruit Crush and Rainbow Dust are delicious, but damn 70% VG is gloopy as hell!
No leaks (yet) and the nozzle on the novavape bottles are tricky to fill the Crown with (other juices I have are very thin nozzles), and flavour is definitely muted a bit compared to the high PG Hangsen stuff. Might try 60/40 in the future for a bit more flavour.
No leaks (yet) and the nozzle on the novavape bottles are tricky to fill the Crown with (other juices I have are very thin nozzles), and flavour is definitely muted a bit compared to the high PG Hangsen stuff. Might try 60/40 in the future for a bit more flavour.
I concur. SS is so versatile it's the only wire I use now. The only trick is that you need to get your power set right when in TC mode or it will heat up too fast then struggle to maintain temperature. With TI and NI you can just whack it up to max and let the temp sort itself out.
SS is absolutely great though. TC or Power on the same build no problem. Spaced, contact, clapton or twisted no problem too.
Soldato
- Joined
- 18 Oct 2012
- Posts
- 8,340
Along with the vcmt, this proves the 510 is an inadequate standard for modern vaping kit.
Also why, what mod could even power that?
Associate
- Joined
- 5 Feb 2003
- Posts
- 903
- Location
- My Own Personal Hell
Yup, feels like my trusty old DNA30 on steroids!
Got to say I'm not a fan of the battery sledge ridges or the shallow 510, so may end up doing some DIY in a few months, but I'll see how it goes! Love the screen & the software, keep tweaking and checking. Even the live stats are pretty cool.
Cheers both, I'll pop in an order for some SS in a while. Just waiting for all the Aromamizer v2\supreme comments on here before I move away from my Billow v2's!
Man of Honour
- Joined
- 13 Nov 2009
- Posts
- 11,632
- Location
- Northampton
This just proves that a handful of vapers are completely ****ing stupid
Products like that are totally unnecessary, nothing wrong with the 510 connector that has been become standard
Soldato
- Joined
- 8 Feb 2009
- Posts
- 3,462
- Location
- Sheffield
If I had money to just fling around I'd probably get one, plonk it on a hammer of god, just for a bit of fun
Man of Honour
- Joined
- 13 Nov 2009
- Posts
- 11,632
- Location
- Northampton
I paid a pound less for it, a couple of days after release, in a physical shop
If I had money to just fling around I'd probably get one, plonk it on a hammer of god, just for a bit of fun
A HOG isn't exactly an everyday carry type mod though, I know of couple of people that have had them. Again something else totally unnecessary
They also have the artery nugget too for £19
Think I'm going to move the VCMT on, 30mm is a bit much for me, I expect the 25mm to be much better, the 30mm is feeling more like a novelty.
Last edited:
Just placed an order for both of these flavours at 60/40 they sound up my street, usually mix my own at max VG, hoping the slightly higher PG content makes up for the muted flavour of a tank and helps with the throat hit. (I seem to compensate with high power builds rather than increasing nic/pg content
)
Last edited:
Soldato
- Joined
- 18 Oct 2012
- Posts
- 8,340
From a purely engineering perspective its not well sized for even a 25mm tank, as well as the inconvenience of tanks not being able to stand well on their own.
Provari are onto something with their p3, its just itll need more adoption methinks
They also have the artery nugget too for £19
Think I'm going to move the VCMT on, 30mm is a bit much for me, I expect the 25mm to be much better, the 30mm is feeling more like a novelty.
Already? That wasnt that long lol.
Although i do confess im thinking building a little less next time, its current config is more powerful than i can afford to keep
Man of Honour
- Joined
- 13 Nov 2009
- Posts
- 11,632
- Location
- Northampton
I doubt the P3 will ever be adopted, the 510 has been around too widely adopted already and the P3 connector has been around long enough that it would have been adopted already it was going to take off already
Vapemail, Goblin Mini V2, put a single Parallel coil, 317L 25awg SS, 2.5mm ID, 30w Rayon wick and its fantastic.
The deck is about 1mm bigger, the screws did not clip my leads and the flavour is just about spot on, the top fill is a god send compared to the old version bottom screw that was just too tiny and fiddly to use.
The deck is about 1mm bigger, the screws did not clip my leads and the flavour is just about spot on, the top fill is a god send compared to the old version bottom screw that was just too tiny and fiddly to use.
- Status