- Joined
- 27 Apr 2014
- Posts
- 859
LOL everyone always says that,it is normal intel CPU.I will check the internet,since I have not even used my Intel machines for years,if it is good I will post BIOS settings and make a thread just like this one.
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
5800X Boost set to 5050Mhz all cores with AMD Curve Optimizer
- Thread starter gerardfraser
- Start date
Can't wait, love a good Gerard thread on PBO. Highlight of Tier 3 lockdown
Anyone ever get kernal power failure event id 41 error codes from random system reboots? my 5950x has PBO on which is running supposedly stable settings and it passes validation in stress tests but then the PC randomly reboots and starts posting while the PC is just idling at desktop
Try disabling c-states and see how it goes.
Have exactly the same issue. Tried everything I can to solve it. Gave up in the end & turned PBO off for now until the bios gets updated
tbh I dont even know what a c state is. When I get a chance I'll make a copy of the current PBO settings and post here so I can get advice on what to change
out of interest, what motherboard and bios?
MSI X570 Tomahawk, bios 140, but tried the beta 1.51 as well with the same issue.
change psu status in bios can help
which setting is that?
Caporegime
Sounds like curve optimiser settings that are not quite stable.
curve optimizer is disabled - apparently it was attempted but crashed even more often so was disabled
Will check it out thanks. The psu is a brand new Corsair hx1200i
The bios had two seperate overclocking profile loaded - PBO and an all core 4.3ghz 1.26v profile - both the all core and PBO profiles crash BUT if I reset the BIOs to stock the crashing goes away. Both of these profiles also have a memory overclock so I need to check that the memory is stable too
Last edited:
Caporegime
@Grim5
Rather than disabling C States which can lower boost frequency, look for an option called Power Supply Idle Control in the AMD CBS menu. Set this to typical. If your issue is related to C States, this should address it.
Update, I reset all the PBO settings and copied all the settings I found in this video, except for curve optimizer - as soon as I enable curve optimizer the PC crashes at the windows login screen.
The system is now stable
So I can build from this. Only issue with the settings in this performance loss. The PBO settings image above gives 11000 cinebench r20 multi and 630 single. The settings from this video gives 10700 multi and 610 single.
Any ideas which settings can be tweaked a bit to get performance up?
Funny thing though with these settings, they seem to produce higher clocks yet performance is lower. For example single core shows up to 5240mhz yet score dropped from 630 to 610.
I thnk fmax enhancer might be causing that, should I disable it or does something else need tweaking
json format validator
The system is now stable
So I can build from this. Only issue with the settings in this performance loss. The PBO settings image above gives 11000 cinebench r20 multi and 630 single. The settings from this video gives 10700 multi and 610 single.
Any ideas which settings can be tweaked a bit to get performance up?
Funny thing though with these settings, they seem to produce higher clocks yet performance is lower. For example single core shows up to 5240mhz yet score dropped from 630 to 610.
I thnk fmax enhancer might be causing that, should I disable it or does something else need tweaking
json format validator