Soldato
TomL said:
hi
perhaps i should set mine then to +0.2v?
also on my ocz ram (offer one) would i not set it to 4-4-4-15 ?
cheers
Last edited:
Gigabyte DS3/DS4/DQ6 Guide
- Thread starter Monstermunch
- Start date
hi
perhaps i should set mine then to +0.2v?
also on my ocz ram (offer one) would i not set it to 4-4-4-15 ?
cheers
Soldato
It'll run fine at 4-4-4-12.
Soldato
Has anyone tried running memory in all 4 slots (not necessarily at the same time) above 820mhz?
I've just installed 4x1gb of Crucial Ballistix, but one of the slots (DDRII2/left-hand red one) refuses to budge over 820mhz
The other three slots will all let me boot all four sticks at 1000mhz.
I'm not even sure if that's grounds for RMA considering that the spec only goes as high as ddr2-800.
I've just installed 4x1gb of Crucial Ballistix, but one of the slots (DDRII2/left-hand red one) refuses to budge over 820mhz
The other three slots will all let me boot all four sticks at 1000mhz.
I'm not even sure if that's grounds for RMA considering that the spec only goes as high as ddr2-800.
Soldato
hi
when i change the voltages on the below i can only seem to see 0.10v in the selection it starts from +0.10v ,0.15v , +0.20v and up?
in the guide in the first page it says +0.1v would that be the +0.10v as above?
7. Set the MCH Voltage to +0.1v
8. Set the FSB Voltage to +0.1v
cheers
when i change the voltages on the below i can only seem to see 0.10v in the selection it starts from +0.10v ,0.15v , +0.20v and up?
in the guide in the first page it says +0.1v would that be the +0.10v as above?
7. Set the MCH Voltage to +0.1v
8. Set the FSB Voltage to +0.1v
cheers
Soldato
Yip 0.10v is the same as 0.1v.
Associate
Hi im having problems getting my lan port working on my ds4 
the connection does not show up in network connections, and only shows up in device manager when show hidden devices is ticked ( as marvel yukon 88e8053 pci-e gigabit ethernet controler-packet scheduler),but under the driver tab shows a microsoft driver? I have tried to update to the latest driver on the gigabyte website but this has no effect
Any ideas???????????????????????????????????????
the connection does not show up in network connections, and only shows up in device manager when show hidden devices is ticked ( as marvel yukon 88e8053 pci-e gigabit ethernet controler-packet scheduler),but under the driver tab shows a microsoft driver? I have tried to update to the latest driver on the gigabyte website but this has no effect
Any ideas???????????????????????????????????????
Associate
please help, have never used the port before want to use for my modem, up until now have been using a usb connection for my internet conection will the lan port be better?
Associate
just been checking my bios settings, and there is no option to enable/disable onboard lan (am using the f8 bios) im sure the was an option like this on the ealier versions. was just wondering which bios everyone else is using on there ds4's????? and if some one with an ealier version could tell me if that option is present??????
Soldato
Twinblade said:
Nope it doesn't.
Associate
I've just got a DS3Prev3.3, I cant get my 6300 past 2.5ghz. I tried the settings in the original post.
Any ideas ?
Scooby
(havent overclocked since my barton 2500 days)
Update.
Stopped using easy tune seems better without it.
Any ideas ?
Scooby
(havent overclocked since my barton 2500 days)
Update.
Stopped using easy tune seems better without it.
Last edited:
Am on 965p ds3 rev 3.3 it came with f9 bios any known reason not to keep this bios? also it says to disable Hyper threading in bios well i cant find that option any ideas?
On the main bios screen press Ctrl+F1 to open the advanced options within the menus. On Mine that's already there i dont6 need to hit ctrol+f1.
all sorted changed bios to f10
can do 3ghz on default vcore with +0.1 everything else
well it did orthos ok for an hour will test it overnight some time
bumped it to 3.3ghz failed orthos but didnt when i upped core to 1.5 :~)
On the main bios screen press Ctrl+F1 to open the advanced options within the menus. On Mine that's already there i dont6 need to hit ctrol+f1.
all sorted changed bios to f10
can do 3ghz on default vcore with +0.1 everything else
well it did orthos ok for an hour will test it overnight some time
bumped it to 3.3ghz failed orthos but didnt when i upped core to 1.5 :~)
Last edited:
Associate
I instaled water cooling the other day and have been trying to get my system stable at 3.4 . I am using the 9x multi at a bus speed of 378 , when running orthos with small FTT it does fine for 8 hours but fails quite quickly in blend. currently have a the vcore set just above 1.5 , vmch +0.15, fsb +0.15 and vdimm of +0.3. Ram is underclocked at 756. any ideas???? 
My spec is in sig.
My spec is in sig.
sulli said:I instaled water cooling the other day and have been trying to get my system stable at 3.4 . I am using the 9x multi at a bus speed of 378 , when running orthos with small FTT it does fine for 8 hours but fails quite quickly in blend. currently have a the vcore set just above 1.5 , vmch +0.15, fsb +0.15 and vdimm of +0.3. Ram is underclocked at 756. any ideas????
try +0.2v
can someone just point me in the correct direction please
Got my DS3 from COB (cheers mate!) and have bunged in 2 x 1gb of ballistix PC6400. Have followed the guide on the first page and a simple overclock to 2.7ghz was acheived. not had time to push further yet.
however, i was wondering how i run my ram 1:1 as it should be able to push a fair way with the set i have. When i set the System Memory Multiplier to "2x", is this the same as like running a divider on an AMD system???
Got my DS3 from COB (cheers mate!) and have bunged in 2 x 1gb of ballistix PC6400. Have followed the guide on the first page and a simple overclock to 2.7ghz was acheived. not had time to push further yet.
however, i was wondering how i run my ram 1:1 as it should be able to push a fair way with the set i have. When i set the System Memory Multiplier to "2x", is this the same as like running a divider on an AMD system???