*****Official ASUS MAXIMUS FORMULA thread*****

chriscatt said:
Hi, what are you using to measure those temps with, probe? When using everest or core temp what are the temps of your cores under 100% load such as prime?
Thanks..
ChrisC
Click to expand...

Right, bumped her quickly up to 333fsb, 1.28V in cpuid/asusprobe. 19c ambient and c0=23,c1=23,c2=24,c3=24. Ran prime95 through for a quick 30min blat and temps peaked at 38c across the 4 cores. Really chuffed I have a chip with such an even heatload across the cores on idle/load :) I have been lazy and asked on xtreme for some quick settings to run her at 400fsb. Once I do that I will let you know what temps I get if you want.
 
I will as of tomorrow. I have the 4gb 800 c4 kit on it's way to me.

/Edit. Probably not tomorrow. Ordered in good time today, delivery date was shown as tomorrow but it's 'in warehouse queue' currently..............
 
Last edited:
Ive just finished a build with this mobo, getting CMOS err on the poster, pretty sure it may have also said DET DRAM. got 1gb of Balistx PC8500 in there.

Too late to have a play tonight, I was thinking the battery may be dead but now thinking it could be a ram volt problem, which is annoying as I cant get into the Bios to change it and I havent got any spare RAM :mad:

I'll have another go tomorrow checking all my connections etc, but ive got a feeling I will be posting a new build help thread :eek:
 
Hi, throw some cheap ram in there and set the mem volts to 2.0, either that try a different ram socket...
ChrisC
 
Soulja said:
Just installed this board, anybody want to give me some tips on overclocking my q6600?
Click to expand...
If its a Go stepping and water to the nb then this should get you going , depending on what ram then you will need the right divider also need to use your ram volts

dscf0736zs8.jpg


dscf0737ic0.jpg


dscf0738rb6.jpg


dscf0739xj3.jpg
 
It is a G0 but i'n using a tuniq tower at the moment, thanks for the screens :) i'll go and have a quick go before bed :D
 
kevpuk said:
505 here......think a new one is out today (see a few posts back) but dunno what it does......
Click to expand...

Thanks

Just had a look

Maximus Formula BIOS 0505
1. Add new CPU uCode to support new processors
2. Revise wording used in BIOS
3. Adjust NB Voltage max to 1.85V
4. Enhance DDRII-1200 memory compatibility
5. Finetune Loadline Calibration control code
6. Add LCD Poster Mode item
 
So do we have any idea on the changes in 602 yet ? Must admit to have been too busy to really try it......10-month olds, eh ?!
 
You must log in or register to reply here.
Back
Top Bottom