Post your FTTC line stats & unlocking info

Mine too, had everything, Jamo speakers, CB radios, my fav shop of all.


Ive ordered a 0.5m high speed DSL cable, see how it goes, not really for speed, but for cable management.
 
Last edited:
The High speed DSL cable is here and it's added 1.5mb to my attainable rate, not bad really, I wasn't really bothered about the speed, just to tidy the install up and looks much - much neater.

For the price, I recommend it.
 
Last edited:
Locky said:
The High speed DSL cable is here and it's added 1.5mb to my attainable rate, not bad really, I wasn't really bothered about the speed, just to tidy the install up and looks much - much neater.

For the price, I recommend it.
Click to expand...

Thanks for the tip; I've just ordered one. It looks to be of much better quality than the ones that are bundled with modems.

Is there a preferred way to connect this new cable without it looking like a disconnection, and therefore possibly affecting the sync speed?
 
Hi all,

I had my 80/20 rated FTTC circuit installed yesterday, my work provided this as a WMBC Wholesale connection.

I am getting around 57mb / 17.5mb throughput (untweaked)

BT have installed the BT Open reach VDSL modem which is B-Focus V-2FUb/r Rev B

What sort of unlocking can I do with these (if any) and will it boost sync speed/throughput?

Can anyone point me in the direction of some reliable guides?
 
DJMK4 said:
Hi all,

I had my 80/20 rated FTTC circuit installed yesterday, my work provided this as a WMBC Wholesale connection.

I am getting around 57mb / 17.5mb throughput (untweaked)

BT have installed the BT Open reach VDSL modem which is B-Focus V-2FUb/r Rev B

What sort of unlocking can I do with these (if any) and will it boost sync speed/throughput?

Can anyone point me in the direction of some reliable guides?
Click to expand...

You have an ECI modem which is a pain to unlock. You need the HG612 from Huwai.
Unlocking doesn't allow you to tweak any settings apart from QOS which you can switch off and gain a small bit on the up. What it does do is allow you to export the data and graph it, like in the posts above.
 
j_to_da_t said:
Thanks for the tip; I've just ordered one. It looks to be of much better quality than the ones that are bundled with modems.

Is there a preferred way to connect this new cable without it looking like a disconnection, and therefore possibly affecting the sync speed?
Click to expand...

log into the modem - reboot it - before it starts back up (resyncs) - turn it off and install cable.
 
Done, bit of Google easy..

This good or bad?

Code: 
# xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max:    Upstream rate = 15028 Kbps, Downstream rate = 50740 Kbps
Path:   0, Upstream rate = 10000 Kbps, Downstream rate = 39999 Kbps

Discovery Phase (Initial) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
Medley Phase (Final) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
       VDSL Port Details       Upstream        Downstream
Attainable Net Data Rate:      15028 kbps         50740 kbps
Actual Aggregate Tx Power:        6.3 dBm          12.2 dBm
============================================================================
  VDSL Band Status        U0      U1      U2      U3      D1      D2      D3
  Line Attenuation(dB):  6.2     31.7    47.4     N/A    15.6    39.5    60.1

Signal Attenuation(dB):  6.2     30.8    46.5     N/A    15.6    39.5    60.1

        SNR Margin(dB):  9.1     8.9     8.8      N/A    10.5    10.6    10.8

         TX Power(dBm): -4.1    -11.0    5.7      N/A    10.0    7.8    -2.3
 
You must log in or register to reply here.
Back
Top Bottom