Post your FTTC line stats & unlocking info

Locky said:
Has anyone tried the new MK2 VDSL face plates yet?

They are new spec for 17a and 30a and have RIEN and RF filters in them.
Click to expand...

I had mine fitted new MK2 VDSL faceplate




Before on adslnation faceplate:

sync: 17559k snr: 3.1dB line att: 30.5dB CRC errors (24 hours): 1257

New on openreach mk2 faceplate:

sync: 18676k snr: 3.1dB line att: 30.0dB CRC errors (24 hours): 108
 
Broadband Link Downstream Upstream
Connection Speed 39998 kbps 9995 kbps
Line Attenuation 12.8 dB 0.0 dB
Noise Margin 31.1 dB 30.30 dB

Evening everyone,

Just had fttc enabled today (Sky self install). The above stats have been provided by my router. Can anyone give an indication of what speed my line is likely to be capable of if i were to upgrade to the 80mbit Pro package at any point in time?

Cheers,


Russ
 
I would say approx 200m from the cab. Internal wiring is good, (1 cat5e extension). Only thing i can think of is i have an adsl face plate installed as opposed to one of the new Vidal jobbies. Is that likely to cause such an issue?
 
russ9898 said:
Broadband Link Downstream Upstream
Connection Speed 39998 kbps 9995 kbps
Line Attenuation 12.8 dB 0.0 dB
Noise Margin 31.1 dB 30.30 dB

Evening everyone,

Just had fttc enabled today (Sky self install). The above stats have been provided by my router. Can anyone give an indication of what speed my line is likely to be capable of if i were to upgrade to the 80mbit Pro package at any point in time?

Cheers,


Russ
Click to expand...

If the line is decent and there aren't too many people on your cabinet 65 - 80Mb.

With that SNR margin you can be optimistic of 80Mb.
 
Crosstalk will cut that 80Mb down to less if there's enough of it.

My own attenuation is lower however crosstalk has cut me from 99Mb attainable to 75Mb attainable in 7 weeks. The effect can be pretty huge.
 
Code: 
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max:    Upstream rate = 35749 Kbps, Downstream rate = 99920 Kbps
Path:   0, Upstream rate = 19999 Kbps, Downstream rate = 79999 Kbps

Link Power State:       L0
Mode:                   VDSL2 Annex B
VDSL2 Profile:          Profile 17a
TPS-TC:                 PTM Mode
Trellis:                    UN /DN
Line Status:            No Defect
Training Status:        Showtime
                Down            Up
SNR (dB):        11.7            15.3
Attn(dB):        0.0             0.0
Pwr(dBm):        13.0           -6.3
                        VDSL2 framing
                        Path 0
B:              239             237
M:              1               1
T:              23              42
R:              0               16
S:              0.0955          0.3781
L:              20107           5374
D:              1               1
I:              240             127
N:              240             254
                        Counters
                        Path 0
OHF:            175976          73387
OHFErr:         0               0
RS:             0               3080895
RSCorr:         0               0
RSUnCorr:       0               0

                        Path 0
HEC:            0               0
OCD:            0               0
LCD:            0               0
Total Cells:    44748341                0
Data Cells:     32525           0
Drop Cells:     0
Bit Errors:     0               0

ES:             0               0
SES:            0               0
UAS:            44              44
AS:             292

                        Path 0
INP:            0.00            0.00
PER:            1.64            3.97
delay:          0.00            0.00
OR:             116.56          64.47

Bitswap:        0               1
 
Locky said:
Its defo worth unlocking the modem and only takes about 5 mins, really easy to do.
Click to expand...

I got openreach modem EchoLife HG612 3B as it come with firmware version: V100R001C01B028SP10

I had read instructions on the unlocking pdf but I don't understand this question: Configure the ethernet NIC of your PC with IP address 192.168.1.100. (how to do that?) sorry for being numb!

I connect openreach modem Lan2 direct to the back of my pc ethernet and I did type 192.168.1.100. but it come in blank screen. I can see openreach modem ip4 address is reading at 169.254.76.242?
 
You must log in or register to reply here.
Back
Top Bottom