New drivers don't seem to address anything I'm suffering from (idle power issue still), so I'll give em a miss for now.
speaking of that my card is drawing 20-31w idle in windows and a few web tabs open, much better than the 60-80w of drivers old
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
New drivers don't seem to address anything I'm suffering from (idle power issue still), so I'll give em a miss for now.
Add me to the Roll of honour please
First new system in 6 years and she flies!
Ryzen 5 7600x
sapphire mba 7900xt
32gb DDR5 Kingston fury beast 6000mhz
1TB WD SN770 NVME drive
It's pot luck on every GPU sadly. I've had 4x 4090s and they all whined. The Nitro XTX has the least of them all, but it still has some. As does every high end GPU.
I've got no complaints about my 4090 at all, but I do call it as I see it and they all whine to some degree.And I thought you were an AMD fan boy
gahhh damn you..now I need to try em lolspeaking of that my card is drawing 20-31w idle in windows and a few web tabs open, much better than the 60-80w of drivers old
Didn't realize they renamed it. Will amend. CheersThere is no roll of honour. Most realsied how naff it sounded.
Add me to the owners list please
First new system in 6 years and she flies!
Ryzen 5 7600x
sapphire mba 7900xt
32gb DDR5 Kingston fury beast 6000mhz
1TB WD SN770 NVME drive
Chase it up with OcuK and see what they say. I doubt Sapphire will be too much help and will eventually redirect you to the retailer.@LtMatt still no word from ocuk about my MBA RMA request, tbh around 2 weeks have gone by so i dont think i'll get one, i have contacted sapphire directly, they have asked me for a gpu-z log of the card which i have provided, just waiting to see what they say, if i get no joy from sapphire i'll buy a ek block and then sell on the forums, and keep my devil card (like the mba it'll be under watercooling too)
Should be fine, but be aware that Afterburner can interfere which AMD Tuning settings, so make sure you have it set like this and never touch anything in Afterburner in terms of clock speeds, voltages, fan etc. Also make sure erase settings at start-up is disabled.I know people use Adrenaline to OC the cards, but is there any harm also using Afterburner to monitor temps, usage and fan speeds?
Yeah, I was worried about them clashing. I just like the graphs and stuff that Afterburner does.Should be fine, but be aware that Afterburner can interfere which AMD Tuning settings, so make sure you have it set like this and never touch anything in Afterburner in terms of clock speeds, voltages, fan etc. Also make sure erase settings at start-up is disabled.
Understandable. Check my sneaky edit above too.Yeah, I was worried about them clashing. I just like the graphs and stuff that Afterburner does.
I've tried the MBA, Nitro, TUF and the Merc. I rate them in this order:@LtMatt as you now have 4 7900xtx cards which one is the top performing for the money out of all of them? Is it the nitro+? I'm asking as I'm tempted to skip a 4090FE purchase and grab a nitro+.
It's pot luck on every GPU sadly. I've had 4x 4090s and they all whined. The Nitro XTX has the least of them all, but it still has some. As does every high end GPU.
Asking about the monitor? No, not had chance yet. Tempted to leave it as it is for the minute. It's a fresh install so a lot of stuff needs doing and I don't want to spend any more time than necessary messing about. New drivers might fix it too...Understandable. Check my sneaky edit above too.
Lol, I probably sound like a lunatic Gerard but before you call the men in white coats let me pitch my defence to you. Caution, wall of text incoming...FOUR 4090's?? Do you just go overkill on every gpu launch and have to have a stockpile of them sitting around?
The MBA is a very solid card if you don't have the tjunction/vapor chamber issue. You should be happy you got a good one.I called OcUK to request a return & refund of my MBA XTX yesterday and I was told I couldn't unless there was a physical problem/issue with the card. As my junction temps appear to be rock solid (i've tried everything I can to get it to overheat and the damn thing just won't do it), I can't really say its faulty.
Does this mean I have to live with it?
Agree, mine was top notch from a build and quality perspective and no temp issues with hotspot below 90c.The MBA is a very solid card if you don't have the tjunction/vapor chamber issue. You should be happy you got a good one.